Download for Deco X50-Outdoor V1

Please choose hardware version:


>How to find the hardware version on a TP-Link device

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Product Overview

Setup Video

  • How to Configure a Deco System with Starlink

  • How to Resolve Double NAT using Starlink

  • How to Remove the Base Plate from a Deco X50-Outdoor

  • Configuring and Mounting the Deco X50-Outdoor



A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
    How to find the hardware version on a TP-Link device
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

Deco X50-Outdoor(US)_V1_1.2.5 Build 20231121

Published Date: 2023-12-25 Language: Multi-language File Size: 30.67 MB

Improvements and Bug Fixes:
1. Fixed some security vulnerabilities.
2. Newly supports 32-bit subnet mask in both DHCP and static IP connection.
3. Fixed some other bugs.

Deco X50-Outdoor(US)_V1_1.2.4 Build 20230922

Published Date: 2023-10-25 Language: Multi-language File Size: 30.54 MB

Fixed some bugs.

Deco X50-Outdoor(US)_V1_1.2.3 Build 20230912

Published Date: 2023-09-25 Language: Multi-language File Size: 30.43 MB

New features:
1. Supported for customizing Satellite Deco signal source.
2. Supported for customizing Clients connection preference.
3. Supported for Reboot Schedule.
4. Supported for NO-IP and DynDNS.
5. Added Smart DHCP switch under Access Point mode.
6. Added the static route function.
7. Added the ability to customize the MTU.
8. Added IoT network function.
9. Added VPN server/client features, including Open VPN, L2TP VPN and PPTP VPN.
10. Added SafeSearch function and Youtube Restrict function in the Homeshield.
11. Added WiFi Network switch on Web UI.

Improvements and Bug fixes:
1. Optimized the Monthly Reports function.
2. Optimized the Clients List function.
3. Optimized the HomeShield feature, please update your Deco app (iOS version 3.3.55 or above, Android version 3.3.65 or above) to fully utilize it.
4. Fixed some security vulnerability.
5. Fixed the bug that X50-Outdoor 5G backhual fails in some scenes.
6. Fixed the bug that X50-Outdoor shows offline in the APP in some scenes.
7. Fixed some bugs.

1.Please update your Deco APP to the latest version for the new features.
2.If there are other Deco models in your Deco network, you may miss some new features till other models release updates in the near future.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.


TP-Link Deco

The Deco app allows you to quickly and easily install and manage your Deco Whole-Home Wi-Fi System.