Download for TL-WR940N
- Product Overview
How to Set up Address Reservation on TP-Link Routers Windows
This video will show you how to set up Address Reservation on TP-Link routers.More Fold
What should I do if I cannot access the internet? - Using a DSL modem and a TP-Link router
If you can’t access the internet using a DSL modem and TP-Link router, this video can help you solve the problem.More Fold
What should I do if I cannot access the internet? - Using a cable modem and a TP-Link router
If you can’t access the internet using a cable modem and TP-Link router, follow this video step by step to solve your problem.More Fold
Quick Tips - How to Log into a Router's Web Interface
This video will show you how to login to your TP-Link router's web interfaceMore Fold
How to turn a router into an Access Point?
- How to find your TP-Link Router’s IP address
- Why port forwarding feature is not working on my Wi-Fi router or Deco?
- How to Avoid Double NAT When DSL Modem Router and Wireless Router are Used Together
- How do I log into the web-based Utility (Management Page) of TP-Link wireless router?
- How to view System Log of TP-Link wireless Router
- Why My TP-Link Router Can Not Get WAN Parameters From My Modem?
- How to bind IP Address and MAC Address on TP-Link Router
- How to confirm whether the router is connected to internet through Diagnostic function
- How to set up access control for website blocking on TP-Link Wireless Router (older green UI)
- How to Setup DDNS(DynDNS) on Wireless Router
- How to configure Wireless MAC address filter on wireless router
- How to use Parental Control function on Wireless router
- How to find the wireless key on the 11N router
- How to Setup DDNS (No-IP) on TP-Link Wireless Router
- How to improve my wireless speed or range
- How to use bandwidth control on TP-Link wireless router
- How to configure Static Routing on wireless routers
- How to protect your TP-Link network devices from potential attacks
- How to do troubleshooting from the system log when PPPoE connection fails
- How to install TP-Link wireless router to work with a DSL Modem (PPPoE)
- How to Upgrade the firmware version of TP-Link Wireless Router
- How to configure the TP-Link wireless router as Access Point
- How to Upgrade the Firmware on the TP-Link Wi-Fi Routers
- What should I do if fail to upgrade the firmware of my TP-Link router?
- Why cannot log into the Management Page with NOD 32 ESET?
- How to find or change the wireless password on the TP-Link products
- What can I do if my router keeps rebooting itself?
- What should I do if I cannot open specific websites?
- What should I do if the internet light is off or there is an error message “ WAN Port Unplugged” on the TP-Link router page?
- What should I do if wireless connection cannot work on TP-Link Wi-Fi router?
- What should I do if the the LED of the TP-Link router is abnormal
- What should I do if I can’t log into web-based interface of my TP-Link device?
- What should I do if my internet connection is slow?
- What can I do if I forget the login password of TP-Link Wireless Router?
- What should I do if I cannot find my wireless network or I cannot connect the wireless network ?
- What should I do if I cannot access the internet through Wi-Fi router?
- Troubleshooting: Unstable wireless connection on TP-Link router
- How to reset TP-Link router to factory defaults
- Application Requirement/Choose WAN Connection Type on my TP-Link router
- How do I install TP-Link router to work with a Cable Modem? (Old UI)
- How do I change the IP address of a TP-Link Wireless Router ?
- How to set up Port forwarding feature on my TP-Link Wireless Router for Xbox Live?
- What are the most frequent asked questions about the TP-Link routers' speed?
- How do I configure MAC Address Clone on my TP-Link Wireless Router(green UI)?
- Why cannot I access the Internet after successfully connected to the TP-Link router’s wireless network(Windows OS)?
- How do I configure Remote Management for my TP-Link Wireless Router?
- How do I secure/protect my wireless network by using WPA-PSK/WPA2-PSK on TP-Link Wireless 11N Router?
- Why my TP-Link Router gets a WAN IP from the modem but no internet access？
- Why cannot I access the Internet after successfully connected to the TP-Link router's wireless network(MAC OS)?
- How to configure Address Reservation on TP-Link wireless router
- How do I configure the basic wireless settings for my TP-Link 11N Wireless Router?
- Application Requirement/Internet Access Control
- How to configure WDS function on TP-Link Wireless Routers(green UI)
- How do I install a TP-Link router to work with a DSL modem (Dynamic IP)?
- How do I install TP-Link wireless router to work with a Modem (Static IP)?
- How do I reduce the MTU size on my TP-Link Router?
- Application Requirement/ Parental Control
- How do I secure/protect my wireless network by using WEP encryption on TP-Link wireless 11N Router?
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
How to find the hardware version on a TP-Link device
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|Published Date: 2016-06-17||Language: English||File Size: 3.86 MB|
Modifications and Bug Fixes:
1. For TL-WR940N(US) V4
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Note: To use Tether, please update your TP-Link device’s firmware to the latest version.
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.