Search
Search

What can I do if I forget the login password of TP-Link Wireless Router?

User Application Requirement
Updated 11-25-2020 06:41:47 AM 3004482
This Article Applies to: 
The default login username and password are both “admin”. If you have changed the login password, there is no way to find it. You need reset it to factory default and configure it as a new one.
 
Directly press and hold the reset button on the rear panel with a pin for approximately 10 seconds when the device is running. 
Release the reset button and wait for the device to reboot.
 
Note:
1. Make certain that the router is powered on before it restarts completely. 2. The default IP address is 192.168.0.1(or http://tplinkwifi.net ), and the default login username and password both are admin (all lower case).

3.  Ensure that the IP address of your computer is in the same subnet with the device.  It means that your computer has an IP address 192.168.0.X (X is in range of 2~253), and the subnet mask is 255.255.255.0.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

SubscribeTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

Be The First To Get Exclusive Deals & News

Let's Connect

About Us
Press
Partners
Learning Center
United States / English
Copyright © 2021 TP-Link Corporation Limited. All rights reserved.