Download for Archer C2
>How to find the hardware version on a TP-Link device
- Product Overview
5.0_1488504785411n_1496626818866o.jpg)
Setup Video
-
How to Set up Address Reservation on TP-Link Routers Windows
This video will show you how to set up Address Reservation on TP-Link routers.
More Fold -
How to Set up OpenVPN on TP-Link Routers Windows
This video will show you how to set up OpenVPN on a TP-Link Wi-Fi router. For more information, visit www.tp-link.com/support.
More Fold -
What should I do if I cannot access the internet? - Using a DSL modem and a TP-Link router
If you can’t access the internet using a DSL modem and TP-Link router, this video can help you solve the problem.
More Fold -
What should I do if I cannot access the internet? - Using a cable modem and a TP-Link router
If you can’t access the internet using a cable modem and TP-Link router, follow this video step by step to solve your problem.
More Fold -
How to turn a router into an Access Point?
-
How to set up Port Forwarding on a TP-Link router
Take Archer A7 as demonstration.
More Fold -
How to set Parental Controls on a TP-Link router
Take Archer A9 as demonstration.
More Fold -
How to change the Wi-Fi settings on TP-Link router
FAQs
- What is the TP-Link Router Alexa Skill and how do I use it?
- Why port forwarding feature is not working on my Wi-Fi router or Deco?
- Why does TP-Link require my email address?
- What is TP-Link ID and how to create a TP-Link ID?
- How to set up an IPv6 Internet connection on the TP-Link Wi-Fi Routers
- What should I do if wireless connection cannot work on TP-Link Wi-Fi router?
- Why cannot I find to my wireless networks?
- Cannot detect or find the wireless signal of Wi-Fi6 products(802.1111ax router/RE/Deco)
- How to set up IPv6 on Archer C2_V5
- How to set up IPv6 service for some specific ISP like BT/Hyperoptic or SKY etc on the wireless router
- Why Do I Fail to Access tplinkwifi.net?
- How to set up QoS using TP-Link Wi-Fi router
- How to set up QoS on the TP-Link Wi-Fi router that doesn’t support HomeCare function
- How to set up Bandwidth Control on Archer C2_V5
- How to configure basic wireless settings of TP-Link 11AC router (new logo)
- How to find your TP-Link Router’s IP address
- How to use Pi-Hole DNS Server on TP-Link routers
- What can I do if I forget the password of my cloud account bound to the TP-Link wireless router?
- How to turn off the QoS feature on TP-Link Router
- How to Avoid Double NAT When DSL Modem Router and Wireless Router are Used Together
- How do I log into the web-based Utility (Management Page) of TP-Link wireless router?
- How to improve my wireless speed or range
- How to improve the signal strength of my 5GHz wireless connection
- How to setup and share a printer on your local network with Print Server feature on the TP-Link device (MAC OS)
- How to register a TP-Link cloud account for my TP-Link wireless router to manage it remotely (New Logo)
- How to set up TP-LINK DDNS on TP-Link Wireless Router (New Logo)
- How to configure the TP-Link wireless router as Access Point
- How to configure Access Control on the Wi-Fi Routers (new logo)
- How to configure IP&MAC Binding Wi-Fi Routers (new logo)
- How to make applications free from port restriction by DMZ (new logo)
- How to make Xbox online games run smoothly by UPnP (new logo)
- How to use PPTP VPN to access your home network through the Wi-Fi Routers (new logo)
- How to configure Wi-Fi Routers to support IPTV service on the Wi-Fi Routers (new logo)
- How to set up System Time of the Wi-Fi Routers (new logo)
- How to test the network connectivity using Diagnostics on the Wi-Fi Routers (new logo)
- How to control LEDs of the Wi-Fi Routers (new logo)
- How to recover the login password in case you forget it (new logo)
- How to limit devices on your LAN from accessing the Wi-Fi Router (new logo)
- How to set up Remote Management on the Wi-Fi Routers (new logo)
- How to configure Address Reservation on Wi-Fi Routers (new logo)
- How to Change the DNS servers on the wireless router and DSL modem router (New UI)
- How to configure Address Reservation on Archer C2_V5
- How to set up Guest Network on Archer C2_V5
- How to configure system time of Archer C2_V5
- How to configure Wireless MAC Filtering on Archer C2_V5
- How to set up BigPond Cable connection on Archer C2_V5
- How to set up Parental Controls on Archer C2_V5
- How to configure Local Management and Remote Management on Archer C2_V5
- How to configure DMZ host on Archer C2_V5
- How to upgrade firmware of Archer C2_V5
- How to configure Dynamic DNS on Archer C2_V5
- How to configure IP&MAC Binding on Archer C2_V5
- How to set up Access Control on Archer C2_V5
- How to Upgrade the Firmware on the TP-Link Wi-Fi Routers (New Logo)
- How to configure Parental Controls on the Wi-Fi Routers (case 2)
- How to Join an OneMesh Network with a Range Extender Already Set Up
- How to setup TP-Link Wi-Fi Router on Tether APP
- How to set up Wireless Schedule on your TP-Link Router
- How to configure your TP-Link Wireless router with CenturyLink’s fiber service (new logo)
- How to Upgrade the Firmware on the TP-Link Wi-Fi Routers
- How to Establish a VPN Connection on TP-Link Wi-Fi Router
- How to recover the router when it bricked
- What should I do if VPN doesn't work on Wi-Fi Router?
- What is the TP-Link Smart Connect feature and how to enable it?
- Several questions about the OneMesh™ and Mesh
- What should I do if Wi-Fi calling cannot work through TP-Link wireless router?
- How to configure IPTV function on wireless router (For new logo)？
- What should I do if fail to upgrade the firmware of my TP-Link router?
- What should I do if I cannot access printer/internal server after changing the router
- What can I do if my router keeps rebooting itself?
- Only the wired connection or wireless connection is not working
- What should I do if I cannot open specific websites?
- What should I do if the internet light is off or there is an error message “ WAN Port Unplugged” on the TP-Link router page?
- What should I do if the the LED of the TP-Link router is abnormal
- What should I do if I can’t log into web-based interface of my TP-Link device?
- What should I do if my internet connection is slow?
- What can I do if I forget the login password of TP-Link Wireless Router?
- What should I do if I cannot find my wireless network or I cannot connect the wireless network ?
- What should I do if I cannot access the internet through Wi-Fi router?
- Troubleshooting: Unstable wireless connection on TP-Link router
- Port forwarding: how to set up virtual server on TP-Link wireless router?
- What are the differences between Admin & User cloud accounts on TP-Link wireless router?
- Brief introduction of cloud functions on TP-Link wireless router(New Logo)
- How to reset TP-Link router to factory defaults
- Changing Channel and Channel Width on a TP-Link Router (new logo)
- How do I configure MAC Address Clone on my TP-Link Archer Router?
- How to configure VLAN ID for your internet connection on wireless router (For new logo)
- How do I install TP-Link Archer router to work with a Cable Modem ?
- How do I install TP-Link Archer router to work with a DSL Modem?
- How to change wireless settings of TP-Link wireless router on Tether APP
- What are the most frequent asked questions about the TP-Link routers' speed?
- Setting up parental controls on TP-Link wireless routers via Tether APP (TL-WR841N)
- Performance Comparison Chart of TP-Link Wireless Router
- What can I do if my 2.4GHz WiFi gets into trouble with a hard disk drive plugged into the USB 3.0 port of a TP-Link wireless router?
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer C2(US)_V5_170531 |
Download | |
|---|---|---|
| Published Date: 2017-05-31 | Language: English | File Size: 5.54 MB |
|
Modifications and Bug Fixes: First firmware released. Notes: 1. For Archer C2(US)_V5 |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
GPL Code
Emulators
Firmware Version |
Working Mode |
Language |
|
|---|---|---|---|
170531(US) |
- |
English |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.