Search
Search

How to set up Remote Management on the Wi-Fi Routers (new logo)?

Configuration Guide
Updated 03-28-2017 01:52:48 AM
This Article Applies to: 

1. Log in to the web-based interface of the router. If you don’t know how to do that, please refer to

a. How to log in to the web-based interface of Wi-Fi Routers (new logo)?

b. How to log in to the web-based interface of Wi-Fi Routers (new logo)?

2. Go to Advanced > System Tools > Administration and complete the settings in Remote Management section as needed.

  • Forbid all devices to manage the router remotely:

      Select Disable Remote Management and click Save.

  • Allow all devices to manage the router remotely:
  1. Select Enable Remote Management for All Devices.
  2. Enter Web Management Port (1024-65535 or 80).
  3. Click Save.

Devices on the Internet can log in to http://Router’s WAN IP address:port number (such as http://113.116.60.229:1024) to manage the router.

Tips:

You can find the WAN IP address of the router on Basic > Network Maps > Internet.

The router’s WAN IP is usually a dynamic IP.

  • Allow specific devices to manage the router remotely:
  1. Select Enable Remote Management for Specified Devices.
  2. Enter Web Management Port (1024-65535 or 80).
  3. In Remote Management IP address, enter the IP address of the remote device to manage the router.
  4. Click Save.

Devices using this WAN IP can manage the router by logging in to http://Router’s WAN IP:port number (such as http://113.116.60.229:1024).

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

SubscribeTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

Let's Connect

About Us
Press
Partners
Learning Center
United States / English
Copyright © 2020 TP-Link Corporation Limited. All rights reserved.