Download for Archer MR200
>¿Cómo encontrar la versión de hardware en un dispositivo de TP-Link?
- Visión General
Preguntas Frecuentes
- Several questions about the OneMesh™ and Mesh
- How to set up the 3G and 4G Backup on TP-Link LTE Gateway?
- How to use QoS on TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to set up Ipv6 tunnel on TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to set up an OpenVPN connection with TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to set up a PPTP VPN connection with TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to configure Auto Reboot of TP-Link Dual Band 4G LTE Router (new logo)?
- No internet connection when using TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode(Case 1)
- No internet connection when using TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode(Case 2)
- How to configure Address Reservation of TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to configure Bandwidth Control of TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to log into the web-based management interface of TP-Link Wireless Dual Band 4G LTE Router? (new logo)
- How to set up a VPN connection with TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to create a connection profile with TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to upgrade the firmware of TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to monitor data usage of TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to configure system time of TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to configure Parental Controls with TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to make Xbox online games run smoothly by UPnP with TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to make applications free from port restriction by DMZ with TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to configure IP&MAC Binding with TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to configure Access Control with TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to share local resources on the Internet by Virtual Servers with TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to set up DDNS (Dyndns) of TP-Link Wireless Dual Band 4G LTE Router (new logo)?
- How to set up DDNS (NO-IP) of TP-Link Wireless Dual Band 4G LTE Router (new logo)?
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
¿Cómo encontrar la versión de hardware en un dispositivo de TP-Link? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
| Archer MR200(EU)_V4_20190730 | |||
|---|---|---|---|
| Fecha de Publicación: 2019-09-03 | Idioma: English | Tamaño de Archivo: 7.88 MB | |
|
|||
| Archer MR200(EU)_V4_190307 | |||
|---|---|---|---|
| Fecha de Publicación: 2019-03-22 | Idioma: English | Tamaño de Archivo: 52.84 MB | |
|
|||
| Archer MR200(EU)_V4_181022 | |||
|---|---|---|---|
| Fecha de Publicación: 2018-11-30 | Idioma: English | Tamaño de Archivo: 52.83 MB | |
|
|||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- TP-Link Tether
-
TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices
Note: To use Tether, please update your router’s firmware to the latest version.
Código GPL
Simuladores
Versión de Firmware |
Working Mode |
Idioma |
|
|---|---|---|---|
180920(EU) |
- |
English |