Common questions about Deco

A： Perfect for homes seeking maximum Wi-Fi coverage with speed and simplicity for every user, Deco replaces a collection of routers and range extenders with an intelligent Wi-Fi system made up of multiple units working together seamlessly. Deco maintains a single network throughout your home so you only see one network name and need only one network password. It ensures the best connection to all your devices, even when moving from room to room, whether you’re gaming, streaming or browsing. Within minutes, the intuitive Deco app guides you through an easy setup process that gets each unit up and running and all your devices connected and online. Deco gives you the best possible home Wi-Fi experience.

A: Currently, one Deco network can be controlled by owner account and manager account, but the multiple accounts can’t manage a Deco network at the same time.

No matter you are using owner account or manager account, only one user can log into the Deco app at the same time. If you log in while another user is already logged in the Deco app, the new user will kick out the old one.

A: Both iOS and Android devices are supported. They must support Bluetooth 4.0 or later version as well. Requirements: iOS 9.0 or later, Android 4.4 or later.

A: Deco is designed to replace most home routers. If your old router need a modem to access the internet, then Deco should be used together with the existing modem.

A: Currently, Deco supports five internet connection types: PPPoE, Static IP, Dynamic IP, PPTP, and L2TP. That means Deco can work with most ISPs.

A： Your email address will be used:

• Verify your account.
• Reset your password
• Remote management of your Deco network
• Work with third-party integration such as Amazon Alexa

A: The Deco app allows you to enable both at the same time. However, please note that, if the settings conflict, activity QoS takes priority over individual devices.

Note: Some Deco models only support device QoS, such as Deco M4 and E4, etc.

A: Deco supports both wired and wireless connections.

For wireless devices, you only need to find Deco's Wi-Fi name on the client and connect with the Wi-Fi password.

You can also connect a device to the Deco network via an Ethernet cable, including PC, printers, TVs, etc. Each Deco provides two Ethernet ports on the back for wired devices. You can also connect a switch to the Ethernet port to expand the wired connections.

A: Sure! After successfully binding Deco units to a TP-Link ID, users can manage a Deco network via the Deco app on their smartphone or tablet, even outside the house.