How do I install TL-WR802N/WR810N to work with a DSL modem (Dynamic IP-new logo)?

Configuration Guide
Updated 07-08-2021 02:34:23 AM 39613
This Article Applies to: 

Preparations:

1.Connect your modem to the WAN/LAN port of the TP-Link router via an Ethernet cable.

2.Power on your router first and then modem.

3. Use the default Wi-Fi Name and Wi-Fi Password printed on the Wi-Fi Info Card to connect your laptop or smart phone to the router.

Check the internet connection on your laptop or smart phone, and please note that:

- If you can access internet without any restriction, no other configuration is required.

- If you're redirected to an authentication page, please complete it to access internet.

Here takes TL-WR802N as an example.

1. Login the router. Please refer to FAQ.

2. Go to Quick Setup and click Next to start.

3. Choose the Wireless Router mode and click Next.

4. Select Dynamic IP as WAN Connection Type, and click Next.

5. Please select to clone the mac address or not and click Next. For other connection types, please enter the parameters provided by your ISP, and then click Next.

6. Either customize your Wireless Network Name and Wireless Password or keep the default ones, and then click Next.

7. Click Finish to complete the configuration. Wait for a few minutes and check the WAN part on the Status page, if it shows any IP address (similar as below), that means the connection between the Router and the Modem is established.

 

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >

From United States?

Get products, events and services for your region.