Search
Search

How to configure Guest Network on Archer C50/C20/A5 (new logo)?

Configuration Guide
Updated 01-07-2019 07:12:31 AM
This Article Applies to: 

Guest Network allows you to provide Wi-Fi access for guests without disclosing your host network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network settings to ensure network security and privacy.

Here takes Archer C20_V4 as demonstration:

1. Log in the router’s management interface. If you don’t know how to do that, please refer to How to log in to the web-based interface of Wi-Fi Routers (new logo)?

2. Go to Guest Network.

3. Enable the Guest Network function.

4. Create a network name for your guest network.

5. Select the Security type and create the Password of the guest network.

6. Select Schedule from the Access Time drop-down list and customize it for the guest network.

7. Click Save.

• Allow Guest To Access My Local Network - If enabled, guests can access the local network and manage it.

• Guest Network Isolation - If enabled, guests are isolated from each other.

• Enable Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules will take effect.

Note: The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on the Bandwidth Control > Control Settings page.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

Follow Us

About Us
Press
Where to Buy
Learning Center
Norway / English
Copyright © 2020 TP-Link Corporation Limited. All rights reserved.

From United States (English)?

Check products and services for your region.

Go Other Option