Definition:The TL-MR3020/MR3040 borrows existing wireless Internet and broadcasts it using a different network name(SSID). This application can create two individual networks for two groups of users sharing one Internet.
Application: Small restaurant,shop,bar,home,office and others where Internet service needs to be provided for guests without revealing the SSID of the existing network for hosts.
Information of Root Router:
Access web interface
Please refer to this FAQ to log into the web interface of TL-MR3020
Please refer to this FAQ to log into the web interface of TL-MR3040.
Go to Quick Setup-> Click Next
Choose the WAN Connection your ISP is using. In most cases,it will be Dynamic IP.
If you’re not sure, please consult with your ISP customer service or refer to the link below:
Procedures are different according to the Connection Type you choose.
Find the root router’s SSID, then click on Connect.
Confirm the Wireless Key type and input the same Wireless Password of your root router.
Create a Local SSID for TL-MR3020/MR3040,Click Next.
Click Reboot, and wait until it goes to 100%.
Now all the basic configurations have been finished. Please go to Status page. Then you can check the information under WAN to see whether you have successfully connected to your WISP.
Note: If the there are no IP parameters (all zeroes: 0.0.0.0) displayed here, the connection to your WISP must be not successful. Please consult your service provider for more information to configure the router again.
If it doesn't work, please feel free to contact us(firstname.lastname@example.org).
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Is this faq useful?
Your feedback helps improve this site.