How to set up the Tapo camera

Configuration Guide
Updated 09-01-2023 06:00:23 AM 947979
This Article Applies to: 

Follow the steps below to get started with your new camera. Here we take Tapo C211 as an example.

Step 1. Download the Tapo APP

Get the Tapo APP from the APP Store or Google Play, or by scanning the QR code below.

Step 2. Log In

Open the app, and log in with your TP-Link ID. If you don't have an account, create one first.

Step 3. Set up the camera

Follow the APP instructions to complete the setup.

Note: The location permission is needed to find and connect to your camera during the setup. Grant the location permission when prompted and you can disable it after the setup.

For iOS:

1. Tap Add Devices or tap and select Add Device in the app. Then search for Tapo C211 (your device model).

2. Plug in your camera and wait about 30 seconds until the LED blinks red and green. Click Already Red and Green and go to the next step.

3. Go to your phone's or tablet’s Wi-Fi settings and join your camera’s network: Tapo_Cam_XXXX. Then return to this APP.

4. It will start searching for your camera. This may take a minute or two.

5. After the camera is found, connect the camera to your home Wi-Fi network and enter the password.

6. Click Join on the pop-up window, and it will start pairing your camera. Make sure the LED stays solid on during the pairing.

7. When the pairing is complete, give your camera a unique name and set a location for easy identification. Click Next to complete the setup.

8. The “Complete” page means the camera is successfully added and tap Done to start using your camera.

For Android:

1. Tap Add Devices or tap and select Add Device in the app. Then search for Tapo C211 (your device model).

2. Plug in your camera and wait about 30 seconds until the LED blinks red and green. Click Next.

3. Grant the location access and allow the location permission to find and connect to your camera. You can disable it after the setup. Then it will start looking for your camera.

4. After the camera is found, connect the camera to your home Wi-Fi network and enter the password. Click Next.

5. It will start pairing your camera. Make sure the LED stays solid on during the pairing.

6. When the pairing is complete, give your camera a unique name and set a location for easy identification. Click Next to complete the setup.

7. The “Complete” page means the camera is successfully added and tap Done to start using your camera.

If it still failed, please refer to the troubleshooting: What should I do if I fail to configure Tapo Camera?

To get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Related FAQs

Looking for More

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

Setup Videos

Tapo Smart Camera Unboxing and Configuration Video

How to Install microSD Card and Reset Your Camera Tapo C310&C320WS&C325WB&TC65

Tapo Smart Camera Unboxing and Setup Video Tapo C310&C320WS&TC65

How to Install microSD Card for Tapo Pan&Tilt Wi-Fi Camera: Tapo C200/Tapo C210/ TC70

How to Reset Your Tapo Pan&Tilt Wi-Fi Camera: Tapo C200/Tapo C210/ TC70

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >

From United States?

Get products, events and services for your region.