Download for CPE605
IMPORTANT:
Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8)
Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
Vx.30=Vx.32 (eg:V3.30=V3.32)
Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8)
Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
Vx.30=Vx.32 (eg:V3.30=V3.32)
FAQs
- What should I do if I got a certificate error?
- How to adjust orientation of outdoor AP for better signal coverage
- How to build a Wireless Broadband Network for Remote Village using tp-link products
- How to build a Network for LAN-LAN Wireless Connection using tp-link products
- How to build a Wireless Network between home and farm using tp-link products
- How to use Iperf to test the speed on Outdoor CPE in PtP Network
- Why cannot I log in to the web management page of the CPE?
- Brief introduction of Test Mode
- Why are my devices not detecting the SSID of CPE/WBS in AP mode?
- What if my TP-Link Outdoor Access Points fails to connect to the Ubiquiti access point?
- Pharos MAXtream introduction
- How to Configure the Client Mode on the Pharos device
- How to use CPEs to build up a LAG (Link Aggregation) tunnel
- How to login to the Pharos-Series’ web management page
- How to Configure the AP Router Mode on the Pharos device
- How to Configure the Bridge Mode on the Pharos device
- How to Configure the Repeater Mode on the Pharos device
- How to Configure the AP Client Router Mode on the Pharos device
- How to Configure the Access Point Mode on the Pharos device
- How to Configure Multi-SSID on the Pharos device
- How to Upgrade the Firmware of Pharos Series Product
- How to Restore TP-Link Pharos Series Products to Factory Defaults
- How to Configure Management VLAN on Pharos Series Products
- How to troubleshoot the CPE in AP and Client mode when the wireless speed is slow
- Long distance wireless connection concerns when using outdoor access point
- How to use firmware recovery on the Pharos products
- How can I set up the AP + Client topology successfully?
- How to Select Operation Mode of Pharos Series Products?
- Brief Introduction of AP Isolation
- How to Configure the Distance Value on Pharos Products
- How to Choose Pharos Products for Outdoor Wi-Fi?
- Instructions before installing Pharos outdoor products (CPE/WBS)
- Brief introduction of DFS function