Search
Search

How to set up System Time of 3G/4G Wireless Router TL-MR3420 (new logo)?

Configuration Guide
Updated 09-06-2019 07:48:55 AM 10771
This Article Applies to: 

System time is the time displayed while the router is running. The system time you configure here will be used for other time-based functions like Parental Controls.

Note: TL-MR3420_V5 is used for demonstration in this article.

1. Visit http://tplinkwifi.net, and log in with the password you set for the router. For details, please refer to How to log in to the web-based interface of Wi-Fi Routers (new logo)?

2. Go to Advanced > System Tools > Time Settings.

To get time from the PC:

1. Click Get from PC.

2. Click Save.

To get time from the internet:

1. Select your local Time Zone from the drop-down list.

2. In the NTP Server I field, enter the IP address or domain name of your desired NTP Server.

3. (Optional) In the NTP Server II field, enter the IP address or domain name of the second NTP Server.

4. Click Get from the Internet and click Save.

To set up Daylight Saving Time:

1. Select Enable Daylight Saving Time.

2. Select the correct Start date and time when daylight saving time starts at your local time zone.

3. Select the correct End date and time when daylight saving time ends at your local time zone.

4. Click Save.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

Follow Us

About Us
Press
Where to Buy
Learning Center
Sweden / English
Copyright © 2021 TP-Link Corporation Limited. All rights reserved.

From United States?

Check products and services for your region.

Go Other Option