How do I install TP-Link Archer router to work with a DSL Modem (Dynamic IP-new logo)?
1. Please make sure your DSL modem is synchronized with the internet line, otherwise contact your ISP.
2. This article is only suitable when you have DSL modem and connection type is Dynamic IP.
If you have a cable/fiber modem, please click here;
If you have a DSL modem and your ISP provides static IP address for you, please click here;
If you have a DSL modem and you need to dial up on the computer to get internet from the modem directly, please click here.
Please refer to the QIG in the packet to connect the hardware.
Here takes Archer C7_V5 as demonstration.
Log in to the router’s web-based interface, to get some help, please refer to the article How to log in to the web-based interface of Wi-Fi Routers (new logo)?
Follow step-by-step instruction to finish Quick Setup.
Here we select Dynamic IP as Internet connection Type. Then continue and finish the Quick Setup.
Or go to Advanced > Network > Internet. Select Dynamic IP as internet Connection type. Click Save.
Wait a few minutes. If it shows Internet IPv4 IP address on Network > Internet, or Status, internet is successfully setup.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Your feedback helps improve this site.