Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

Omada_SDN_Controller_v4.4.6_Linux_x64.tar

ダウンロード
公開日: 2021-10-11 言語: 英語 ファイル サイズ: 64.02 MB
オペレーティングシステム: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9.

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_SDN_Controller_v4.4.6_Linux_x64.deb

ダウンロード
公開日: 2021-10-11 言語: 英語 ファイル サイズ: 62.28 MB
オペレーティングシステム: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9.

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada Controller_V4.4.6_Windows

ダウンロード
公開日: 2021-09-28 言語: 英語 ファイル サイズ: 94.07 MB
オペレーティングシステム: Windows 7/8/10/Server

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Omada_SDN_Controller_V4.4.4_linux_x64.deb

ダウンロード
公開日: 2021-08-13 言語: 英語 ファイル サイズ: 62.28 MB
オペレーティングシステム: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9.

If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_SDN_Controller_V4.4.4_linux_x64.tar

ダウンロード
公開日: 2021-08-13 言語: 英語 ファイル サイズ: 63.90 MB
オペレーティングシステム: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9.

If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_Controller_V4.4.4_Windows

ダウンロード
公開日: 2021-08-13 言語: 英語 ファイル サイズ: 94.07 MB
オペレーティングシステム: Windows 7/8/10/Server

If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_SDN_Controller_V4.4.3_linux_x64.deb

ダウンロード
公開日: 2021-07-01 言語: 英語 ファイル サイズ: 62.27 MB
オペレーティングシステム: Ubuntu 14.04/16.04/18.04, Debian 8/9

If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_Controller_V4.4.3_Windows

ダウンロード
公開日: 2021-07-01 言語: 英語 ファイル サイズ: 94.06 MB
オペレーティングシステム: Windows 7/8/10/Server

If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_SDN_Controller_V4.4.3_linux_x64.tar.gz

ダウンロード
公開日: 2021-07-01 言語: 英語 ファイル サイズ: 63.90 MB
オペレーティングシステム: Ubuntu 14.04/16.04/18.04, Debian 8/9, CentOS 6/7

If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_SDN_Controller_V4.3.5_linux_x64.deb

ダウンロード
公開日: 2021-05-07 言語: 英語 ファイル サイズ: 59.39 MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04/Debian

If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide 

Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.

Omada_Controller_V4.3.5_Windows

ダウンロード
公開日: 2021-04-27 言語: 英語 ファイル サイズ: 91.11 MB
オペレーティングシステム: Windows 7/8/10/Server

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.

Omada_SDN_Controller_v4.2.11_linux_x64.tar

ダウンロード
公開日: 2021-02-09 言語: 英語 ファイル サイズ: 59.91 MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Omada_Controller_V4.2.11_Windows

ダウンロード
公開日: 2021-02-09 言語: 英語 ファイル サイズ: 90.12 MB
オペレーティングシステム: Windows 7/8/10/Server

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Omada_SDN_Controller_v4.2.11_linux_x64.deb

ダウンロード
公開日: 2021-02-09 言語: 英語 ファイル サイズ: 58.43 MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Omada_Controller_V3.2.14_Windows64bit

ダウンロード
公開日: 2020-12-25 言語: 英語 ファイル サイズ: 124.47MB
オペレーティングシステム: Windows 7/8/10/Server

Omada_Controller_V3.2.14_Linux_x64.tar

ダウンロード
公開日: 2020-12-25 言語: 英語 ファイル サイズ: 125.65MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian

Omada_Controller_V3.2.14_Linux_x64.deb

ダウンロード
公開日: 2020-12-25 言語: 英語 ファイル サイズ: 99.43MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04/Debian

Omada_Controller_V3.2.14_Windows32bit

ダウンロード
公開日: 2020-12-25 言語: 英語 ファイル サイズ: 120.55MB
オペレーティングシステム: Windows 7/8/10/Server

Omada_SDN_Controller_V4.2.8_Windows

ダウンロード
公開日: 2020-12-11 言語: 英語 ファイル サイズ: 90.11 MB
オペレーティングシステム: Win7/8/10/Server

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Omada_SDN_Controller_v4.2.8_linux_x64.deb

ダウンロード
公開日: 2020-12-11 言語: 英語 ファイル サイズ: 58.42 MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04/Debian

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Omada_SDN_Controller_v4.2.8_linux_x64.tar

ダウンロード
公開日: 2020-12-11 言語: 英語 ファイル サイズ: 59.91 MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Omada_SDN_Controller_v4.2.4_linux_x64.tar.gz

ダウンロード
公開日: 2020-11-10 言語: 英語 ファイル サイズ: 59.89 MB
オペレーティングシステム: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Fedora 20 (or above) and Debian 8/9

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide before upgrading the controller.

Omada_Controller_V4.2.4_Windows_32bit&64bit

ダウンロード
公開日: 2020-11-03 言語: 英語 ファイル サイズ: 90.09 MB
オペレーティングシステム: Win2000/XP/2003/Vista/7/8/8.1/10

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Omada_Controller_3.2.7_Windows32bit

ダウンロード
公開日: 2020-01-21 言語: 英語 ファイル サイズ: 120.53MB
オペレーティングシステム: Windows 7/8/10/Server

New Feature/Enhancement:

1. Expand the number of Omada Controller’s User Account to 500.  

2. Optimize the External Portal Server to support URL with parameters.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

 

Omada_Controller_3.2.7_Windows64bit

ダウンロード
公開日: 2020-01-21 言語: 英語 ファイル サイズ: 124.45MB
オペレーティングシステム: Windows 7/8/10/Server

New Feature/Enhancement:

1. Expand the number of Omada Controller’s User Account to 500.  

2. Optimize the External Portal Server to support URL with parameters.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

Omada_Controller_v3.2.6_linux_x64.tar.gz

ダウンロード
公開日: 2020-01-16 言語: 英語 ファイル サイズ: 123.35MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode.

2. Change the mechanism that multiple Omada Controllers can run on the same subnet.

3. Add the button of “Start Omada Controller after installation” and check it by default.

4. Extend the Max Associated Clients in Load Balance to 255.

5. Optimize the UI of Channel Utilization.

6. Optimize the authentication page of portal.

7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.

8. Optimize the External Portal Server to support URL with parameters.

 

Bug Fixed:

1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups.

2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist.

3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller.

4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

 

Omada_Controller_v3.2.6_linux_x64_deb

ダウンロード
公開日: 2020-01-16 言語: 英語 ファイル サイズ: 99.4MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode.

2. Change the mechanism that multiple Omada Controllers can run on the same subnet.

3. Add the button of “Start Omada Controller after installation” and check it by default.

4. Extend the Max Associated Clients in Load Balance to 255.

5. Optimize the UI of Channel Utilization.

6. Optimize the authentication page of portal.

7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.

8. Optimize the External Portal Server to support URL with parameters.

 

Bug Fixed:

1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups.

2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist.

3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller.

4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Omada_Controller_3.2.6_Windows32bit

ダウンロード
公開日: 2020-01-09 言語: 英語 ファイル サイズ: 120.53MB
オペレーティングシステム: Windows 7/8/10/Server

New Feature/Enhancement:

1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode.

2. Change the mechanism that multiple Omada Controllers can run on the same subnet.

3. Add the button of “Start Omada Controller after installation” and check it by default.

4. Extend the Max Associated Clients in Load Balance to 255.

5. Optimize the UI of Channel Utilization.

6. Optimize the authentication page of portal.

7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.

 

Bug Fixed:

1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups.

2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist.

3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller.

4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

Omada_Controller_3.2.6_Windows64bit

ダウンロード
公開日: 2020-01-09 言語: 英語 ファイル サイズ: 124.44MB
オペレーティングシステム: Windows 7/8/10/Server

New Feature/Enhancement:

1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode.

2. Change the mechanism that multiple Omada Controllers can run on the same subnet.

3. Add the button of “Start Omada Controller after installation” and check it by default.

4. Extend the Max Associated Clients in Load Balance to 255.

5. Optimize the UI of Channel Utilization.

6. Optimize the authentication page of portal.

7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.

 

Bug Fixed:

1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups.

2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist.

3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller.

4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.

 

Notes:

1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.

Omada_Controller_V3.2.4_Linux_x64.deb

ダウンロード
公開日: 2019-11-08 言語: 英語 ファイル サイズ: 99.4MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Add “Select Page” feature on voucher management page.

2. Change default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

Omada_Controller_V3.2.4_Linux_x64.tar.gz

ダウンロード
公開日: 2019-11-08 言語: 英語 ファイル サイズ: 123.35MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Add “Select Page” feature on the management page of vouchers.

2. Change the default status of “Terms of Service” to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Omada_Controller_v3.2.4_Windows32bit

ダウンロード
公開日: 2019-11-08 言語: 英語 ファイル サイズ: 120.52MB
オペレーティングシステム: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.

Omada_Controller_v3.2.4_Windows64bit

ダウンロード
公開日: 2019-11-08 言語: 英語 ファイル サイズ: 124.43MB
オペレーティングシステム: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add “Select Page” feature on the voucher management page.

2. Change the default status of “Terms of Service” on default portal page to uncheck.

3. Optimize the “Free Authentication Policy” to support URL with suffixes.

4. Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.

2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware.

3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller.

Omada_Controller_V3.2.1_Linux_x64.deb

ダウンロード
公開日: 2019-07-26 言語: 英語 ファイル サイズ: 99.23MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the processing time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

 

Omada_Controller_v3.2.1_linux_x64.tar.gz

ダウンロード
公開日: 2019-07-26 言語: 英語 ファイル サイズ: 123.15MB
オペレーティングシステム: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the processing time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally.

3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.

7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.

Omada_Controller_v3.2.1_Windows32bit

ダウンロード
公開日: 2019-07-04 言語: 英語 ファイル サイズ: 120.29MB
オペレーティングシステム: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Omada_Controller_v3.2.1_Windows64bit

ダウンロード
公開日: 2019-07-04 言語: 英語 ファイル サイズ: 124.2MB
オペレーティングシステム: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the performance of Controller to manage up to 1500 EAPs.

2. Optimize the interactive process between EAP and Controller to decrease the process time.

3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million.

4. Optimize display page of map and log when there are a lot of entries.

 

Bug Fixed:

1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled.

2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously.

3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.

 

Notes:

1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version.

Omada_Controller_V3.1.4_Windows64bit

ダウンロード
公開日: 2019-03-08 言語: 英語 ファイル サイズ: 127.5MB
オペレーティングシステム: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

Omada_Controller_V3.1.4_Windows32bit

ダウンロード
公開日: 2019-03-08 言語: 英語 ファイル サイズ: 123.6MB
オペレーティングシステム: Windows 7/8/10/Server

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

7. Channel utilization will take effect only with new firmware.

 

 

Omada Discovery Utility

Omada Discovery Utility 4.2.4

ダウンロード
公開日: 2020-11-09 言語: 英語 ファイル サイズ: 33.16 MB
オペレーティングシステム: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

New Feature/Enhancement:

1. Support to discover the gateway and switch that support Omada SDN platform.

2. Add timeout mechanism during adopting the devices.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

4. Omada Controller and Discover Utility cannot run on the same computer at the same time.

Omada Discovery Utility_v3.2.1

ダウンロード
公開日: 2019-08-06 言語: 英語 ファイル サイズ: 25.85 MB
オペレーティングシステム: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that the Discovery Utility may fail to find EAPs.

2. Fixed the bug that the Cancel button may overlap with the display box after managing APs.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

Omada Discovery Utility_v3.1.13

ダウンロード
公開日: 2019-06-14 言語: 英語 ファイル サイズ: 23.54 MB
オペレーティングシステム: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs.

2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS.

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC.

Omada Discovery Utility_v2.0.0_Mac

ダウンロード
公開日: 2018-07-24 言語: 英語 ファイル サイズ: 84.16 MB

新機能と改良点:
1. "Omada Discovery Utility"に名称を変更しました
2. インストール中の背景画像を更新しました。
3. コントローラー ホスト名の長さを79に上限を設けました。
 
修正したバグ:
検索時にハングするバグを修正しました。
 
注意:
対応OS: Mac OS X 10.7/10.8/10.9/10.10/10.11.

セットアップビデオ

  • How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller

    This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL

    詳細はこちら

  • How to manage TP-Link EAPs centrally via the Software Controller

    This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
    • Install the Software
    • Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
    • Configure Software Controller

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Software Controller
    • Mass EAPs (usually more than three)

    詳細はこちら

  • How to set up a TP Link EAP via your mobile phone

    This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
    • Connect the EAP to the network
    • Download the Omada APP
    • Connect to the EAP's wireless network
    • Set up the EAP using the Omada APP

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models. (except EAP120 and EAP220)
    • A small number (1-3) of EAPs.

    詳細はこちら

  • How to manage TP-Link EAPs centrally from a remote place via a web browser

    You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Controller Software (version 3.0.2 or above)
    • Mass EAPs (usually more than three)

    詳細はこちら

  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    詳細はこちら

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    詳細はこちら

FAQs(よくあるご質問)

ファームウェア

ファームウェアアップデートにより、過去のバージョンと比較しパフォーマンス向上や不具合等が修正される可能性がございます。

アップグレードの際に

注意: アップグレードエラーを防ぐために、アップグレードして頂く前にご覧ください。

  • お使いの機器のハードウェアバージョンをファームウェアバージョンを確認してください。
    異なるファームウェアアップグレードをされますと、機器に不具合や異常を与える可能性があります。( 通常は V1.x=V1)
    ※また保証対象外にもなります。 お住いの地域以外の選択はお勧めできません。
      こちらをクリックしお住いの地域を選択し、適切なファームウェアバージョンをダウンロードしてください。
    ( 例 EUとUSのファームウェアは異なるハードウェアバージョンです)
  • アップグレード中は電源を切らないでください。
    もし電源を切ってしまった場合、製品が永続的に不具合や異常が生じてしまう可能性がございます。
  • ファームアップグレードをワイヤレス接続経由で行わないでください。※TP-LINK製品がワイヤレス機能のみしか無い場合を除いて
  • 全てのインターネット接続されているアプリケーションを停止して頂くか、インターネット回線に接続されている端末をアップグレード前に切断して頂くことを推奨いたします。
  • WinZIPやWinRAR等の解凍ソフトウェアを使用し、アップグレード前にダウンロードされたファイルを解凍してください。

EAP225-Outdoor(JP)_V1_5.0.5 Build 20210618

ダウンロード
公開日: 2021-08-19 言語: 英語 ファイル サイズ: 7.33 MB

このファームウェアはOmada SDNプラットフォームに完全に適応していますが、Omadaコントローラー v4.1.5以上にしか対応していません。

古いOmadaコントローラーを使用していて、EAPのためにこのファームウェアをアップグレードする場合は、Omadaコントローラーもアップグレードする必要があります。: アップグレードガイド

EAP225-Outdoor(JP)_V1_5.0.0 Build 20201015

ダウンロード
公開日: 2020-12-14 言語: 英語 ファイル サイズ: 7.28 MB

This firmware is fully adapted Omada SDN platform but only compatible with Omada controller v4.1.5 or above.

If you are using old Omada controller and plan to upgrade firmware for EAP, then you must upgrade Omada controller as well. Please follow Upgrade Guide to upgrade the Omada Controller.

EAP225-Outdoor(JP)_V1_1.20.0 Build 20200604

ダウンロード
公開日: 2020-07-17 言語: 英語 ファイル サイズ: 7.20 MB

Recommended Controller Software Version: Omada Controller v4.1.4 or above

 

 

EAP225-Outdoor(JP)_V1_1.6.0

ダウンロード
公開日: 2020-03-05 言語: 英語 ファイル サイズ: 7.01 MB

Recommended Controller Software Version: Omada Controller v3.2.x or above

EAP225-Outdoor(JP)_V1_1.4.2_20190613

ダウンロード
公開日: 2019-08-13 言語: 日本語 ファイル サイズ: 9.31 MB

Recommended Controller Software Version: Omada Controller v3.1.x or above

サードパーティー製のファームウェアをTP-Link製品で使用して頂く際に、ご覧ください。

いくつかのTP-LINKの公式ファームウェアはサードパーティーファームウェア(DD-WRT等)に置き換えることが出来ますが、TP-Linkは非公式ファームウェアのメンテナンスやサポートは致しません。またサードパーティー製のファームウェアのパフォーマンスや安定性の保証は致しません。 サードパーティー製のファームウェアを使用して製品に万が一不具合等が生じしてしまった場合、保証対象外になり、弊社はその責任を一切負わないものとします。

プログラマーの方へ オープンソースコード(GPL)

こちらは主にプログラマーの方への情報であり、大多数のTP-Linkホームユーザーには必要ございません。

一部のTP-LINKのソフトウェアコードはサードパーティーのコードを含みます。 GNU General Public Licence(“GPL“)のソフトウェアのタイトル、Version 1/Version 2/Version 3、またはGNU Lesser General Public License("LGPL")等("LGPL"). それぞれのGPLライセンス規約下において、各ソフトウェアをご利用できます。

GPL licence規約の印刷、閲覧、ダウンロードはこちらからできます。 ダイレクトダウンロードや情報詳細のために、TP-LINK製品で使用されているGPLソースコードを受理することになります、 ※TP-LINKソフトウェアGPLソフトウェアコード(GPLコードセンター下)を含む  GPL Code Center.

この配布されたプログラムは保証がございません。 商業可能性の保証や特定目的への適合性は、言外に示されたものも 含め、全く存在しません。詳しくはGNU 一般公衆利用許諾書をご覧ください。 個々のGNUライセンスをご覧ください。

アプリ

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: To use Omada, please update your EAP's firmware to the latest version.

エミュレータ

ファームウェア バージョン
動作モード
言語
180411(EU)
-
英語

注:

1. このエミュレーターは、TP-Link 製品ファームウェアのWebUIを確認できる仮想 Web GUI です。個々の製品の機能や仕様の詳細については、検索機能を使用するか、製品ページを参照してください。エミュレータに存在する機能が、実機に備わっているとは限りません。

2. ファームウェア バージョンがエミュレーターのインターフェイスに表示されているバージョンと一致することを確認してくだださい。各ファームウェア バージョンには、特有の GUI および機能があります。

3. すべてのファームウェア バージョンをエミュレーターで使用できるわけではありません。

4.ログイン用IDとパスワードを求められる場合は、共に「admin」と入力してください。

5.エミュレーターで行った操作は、実際の製品には反映されません。エミュレーターは、製品の設定画面を模したものです。

ここでルーターや中継器の設定はできません。

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

ニュース&オファーTP-Linkはプライバシーを重要視しています。TP-Linkのプライバシーポリシーは TP-Link's Privacy Policyを御覧ください。

From United States?

お住まいの地域の製品やイベント・サービスを確認する。