Téléchargement pour EAP225-Wall V2

IMPORTANT: les disponibilités des modèles et des versions matérielles varient selon les régions. Merci de vous référer au site TP-Link du pays qui vous concerne.
Product Overview
Manual

Setup Video

  • How to Install the Wall Plate Access Point with Mounting Bracket (EAP615-Wall for demonstration)

    This video will show you how to install your Wall Plate Access Point with Mounting Bracket, using EAP615-Wall for demonstration.

    Plus Fold
  • How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller

    This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL

    Plus Fold
  • How to Install and Set Up Omada Software Controller

    This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.

    Plus Fold
  • How to Adopt Omada Devices via Omada Controller

    This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).

    Plus Fold
  • How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller

    This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.

    Plus Fold
  • How to Monitor and Manage Devices via Omada SDN Controller

    This video will show you how to monitor and manage devices via Omada SDN Controller.

    Plus Fold
  • How to Configure Schedules to Automate Network Control via Omada SDN Controller

    This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.

    Plus Fold
  • How to Monitor and Manage Clients via Omada SDN Controller

    This video will show you how to monitor and manage clients via Omada SDN Controller.

    Plus Fold
  • How to Check the Clients Signal Strength and Estimate the Actual Speed

    This video will show you how to check the client signal strength and estimate actual network speeds.

    Plus Fold
  • How to Create User Accounts on Omada SDN Controller

    This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.

    Plus Fold
  • How to Set Wireless SSID for Different Users via Omada SDN Controller

    This video will show you how to set wireless SSIDs for different users via the Omada SDN Controller.

    Plus Fold
  • How to Configure No Authentication Portal via Omada SDN Controller

    This video will show you how to configure No Authentication Portal via the Omada SDN Controller.

    Plus Fold
  • How to Configure Voucher Portal for Different Privilege Users via Omada SDN Controller

    This video will show you how to configure the voucher portal for users with different privileges via the Omada Software Controller.

    Plus Fold
  • How to Use Heat Maps to Deploy Your Network via the Omada SDN Controller

    This video will show you how to use heat maps to deploy your network via the Omada SDN Controller.

    Plus Fold
  • How to Configure Fast Roaming via the Omada SDN Controller

    This video will show you how to configure Fast Roaming via the Omada SDN Controller.

    Plus Fold
  • How to Build an Omada Mesh Network via the Omada SDN Controller

    This video will show you how to build an omada mesh network via the Omada SDN Controller.

    Plus Fold
  • How to Configure Bandwidth Control via Omada SDN Controller

    This video will show you how to configure bandwidth control via Omada SDN Controller.

    Plus Fold
  • How to manage TP-Link EAPs centrally via the Software Controller

    This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
    • Install the Software
    • Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
    • Configure Software Controller

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Software Controller
    • Mass EAPs (usually more than three)

    Plus Fold
  • How to set up a TP Link EAP via your mobile phone

    This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
    • Connect the EAP to the network
    • Download the Omada APP
    • Connect to the EAP's wireless network
    • Set up the EAP using the Omada APP

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models. (except EAP120 and EAP220)
    • A small number (1-3) of EAPs.

    Plus Fold
  • How to manage TP-Link EAPs centrally from a remote place via a web browser

    You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Controller Software (version 3.0.2 or above)
    • Mass EAPs (usually more than three)

    Plus Fold
  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Plus Fold
  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Plus Fold

FAQs

Apps

Omada APP

TP-Link Omada vous permet de configurer les paramètres, de surveiller l'état du réseau et de gérer les clients, le tout depuis le confort d'un smartphone ou d'une tablette. En savoir plus sur les appareils compatibles .

Note: Le switch/routeur SDN est compatible avec l'application Omada uniquement en mode contrôleur. Pour utiliser Omada, veuillez mettre à jour le micrologiciel de votre appareil vers la dernière version.

De United States?

Infos produits, événements, services pour votre pays.