Download for Archer C5
- Product Overview
- Why fail to access tplinkwifi.net?
- How do I install TP-Link Archer router to work with a Cable Modem (new logo)?
- How to improve my wireless speed or range?
- How to configure WDS Bridging on the Archer C8_V1&V2, C9_V1, C5 V2,C1900 V1
- How to do troubleshooting from the system log when PPPoE connection fails?
- How to log into the web-based interface of the Wi-Fi router(new designed blue UI)?
- How to configure Dynamic IP or Static IP on the TP-Link Wi-Fi router to work with a Cable/Fiber modem or a community network(new designed blue UI)?
- What are the most frequent asked questions about the TP-Link routers' speed?
- How to find your TP-Link Router’s IP address?
- How to set up DDNS (DynDNS) on the Archer C8, C5 V2, TD-W9970 router?
- How to set up DDNS (No-IP) on the Archer C8 , C5 V2, TD-W9970 router?
- How do I configure MAC Address Clone on my TP-Link Archer Router(new logo)?
- How to share a printer on your local network through the Archer C8, C9, C5 V2, router?
- How to setup and share a printer on your local network with Print Server feature on the TP-Link device? (MAC OS)
- Why port forwarding feature is not working on my router?
- How to Setup MAC Binding on a TP-Link Router (Blue UI)
- How to setup an AC-class Wi-Fi Router as an Access Point (New Blue UI)?
- How to setup TP-Link wireless router with Unifi IPTV (new designed blue UI)?
- How to Set up Parental Controls of Archer C9_V1, C8, C5_V2, C1900?
- How to set up IPv6 service on the Archer C8, Archer C9, Archer C5 V2
- How to share and access files on your local network drive through the Archer C8, C9, C5 V2 router?
- How to setup and use the FTP Server Function on the Wi-Fi router(new designed blue UI)?
- How to enable Media Sharing on the Wi-Fi router(new designed blue UI)?
- How to share and access files on your local network drive through the TP-Link Wi-Fi router (new designed blue UI)?
- How do I open ports on the Archer C8, C9, C5 V2, router?
- How to configure Guest Network on the Archer C8, C9, C5 V2, router?
- How do I share a USB drive on my Archer C8, C9, C5 V2, router?
- How to enable Media Sharing on the Archer C8, C9, C5 V2, router?
- How to setup and use the FTP Server Function on the Archer C8, C9, C5 V2 router
- How to configure an IP address reservation on the Archer C8 , C5 V2, router?
- How to configure TP-Link Wi-Fi router to work with a DSL modem(new designed blue UI)?
- How to configure my basic wireless setting on TL-LINK dual band wireless router?
- How to set up system time of Archer C9_V1, C8, C5_V2, C1900?
- How to configure Guest Network of Archer Wi-Fi Router (new designed blue UI)?
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （ Normally V1.x=V1）
How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|Published Date: 2015-09-08||Language: English||File Size: 9.97 MB|
|Published Date: 2015-05-15||Language: English||File Size: 9.97 MB|
|Published Date: 2015-01-30||Language: English||File Size: 10.03 MB|
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
|Published Date: 2018-10-29||Language: English||File Size: 2.53 MB|
Operating System: Mac OS 10.9-10.14
|Published Date: 2018-05-03||Language: English||File Size: 2.53 MB|
Operating System: Mac OS 10.9-10.13
|Published Date: 2016-11-24||Language: English||File Size: 14.6 MB|
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10
Note: To use Tether, please update your router’s firmware to the latest version.