What to do if there is no history data from the Tapo temperature and humidity sensor
Q&A of functional explanation or specification parameters
Cập Nhật06-29-2024 03:52:22 AM28855
This Article Applies to:
Tapo T315 , Tapo T310
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
As an owner of the Tapo temperature and humidity sensor T310 or T315, not only can you observe real-time temperature and humidity within the app, but you can also review the historical data to understand the daily, monthly, and yearly changes.
If you notice there is no history data recorded in the Tapo App, or the data stops uploading, the following tips may help to resolve the concerns.
Note: Tapo hub should remain connected to the internet to upload and store Tapo T310/T315’s history data. Data from any power outage period will be lost.
Attempt to manually alter the temperature or humidity in the sensor's surroundings to observe real-time changes in the app. For example, cover the sensor’s top vent hole with your hand, or blow air towards the vent.
Go to Device Settings in the Tapo App -> Device Info -> Tap the signal icon to check the Signal Strength value (RSSI rate).
Strong: more than -50 dBm
Good to Average: among -70 dBm to-50 dBm
Poor: less than -70 dBm
Note: the signal is too weak when it is less than -70dBm, and it is likely to cause a disconnection problem.
Restart the router, wait for 30 minutes then check if the data in the Tapo App has resumed normal recording.
Check if the router has any firewall or ad-blocker settings that might block access to TP-Link servers, preventing the hub from uploading data to the cloud. Disable or remove these settings then monitor future data records.
Change router DNS to 8.8.8.8 and 8.8.4.4.
Restart the Tapo hub.
(Note: unuploaded history data will be deleted after rebooting the tapo hub.)
Câu hỏi thường gặp này có hữu ích không?
Phản hồi của bạn giúp cải thiện trang web này.
Mối quan tâm của bạn với bài viết này là gì?
Không hài lòng với sản phẩm
Quá phức tạp
Tiêu đề khó hiểu
Không áp dụng cho tôi
Quá mơ hồ
Khác
Cảm ơn
Chúng tôi đánh giá cao phản hồi của bạn. Nhấp vàođây để liên hệ với bộ phận hỗ trợ kỹ thuật của TP-Link.
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
Your Privacy Choices
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
Basic Cookies
Những cookie này cần thiết để trang web hoạt động và không thể tắt trong hệ thống của bạn.
Cookie phân tích cho phép chúng tôi phân tích các hoạt động của bạn trên trang web của chúng tôi nhằm cải thiện và điều chỉnh chức năng trang web của chúng tôi.
Các cookie tiếp thị có thể được các đối tác quảng cáo của chúng tôi thiết lập thông qua trang web của chúng tôi để tạo hồ sơ về sở thích của bạn và hiển thị cho bạn các quảng cáo có liên quan trên các trang web khác.