Setup Video

  • How to setup the OC200 via a web browser

    This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Learn More

  • How to setup the OC200 via your mobile phone

    This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Learn More

  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Learn More

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    Làm sao để biết phiên bản phần cứng của thiết bị TP-Link
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
OC200(UN)_v1_1.2.0_Build_20190927
Ngày Phát Hành: 2019-11-15 Ngôn Ngữ: English File Size: 104.13MB

Bundle Omada Controller 3.2.4.

Bundled Firmware:

EAP110_V1, EAP110_V2 EAP110_V4

EAP115_V1, EAP115_V2 EAP115_V4

EAP225_V1, EAP225_V2 EAP225_V3

EAP225-Outdoor_V1

EAP110-Outdoor_V1 EAP110-Outdoor_V3

EAP245_V1 EAP245_V3

EAP115-Wall_V1 (  EAP115-Wall is suitable for EU verison Only.)

EAP225-Wall_V2

EAP235-Wall_V1

EAP230-Wall_V1

EAP320_V1 EAP320_V2

EAP330_V1 EAP330_V2

 

New Feature/Enhancement:

Change the default status of new added “Free Authentication Policy” to enable.

 

Bug Fixed:

Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.

 

Notes:

1. For OC200 (UN) v1.0 only.

2. To use new features of OC200, you need to upgrade your EAP's firmware to the corresponding version.

3. Your device's configuration won't be lost after upgrading.

OC200(UN)_v1_1.2.0_Build_20190823
Ngày Phát Hành: 2019-10-14 Ngôn Ngữ: English File Size: 104.14MB

Bundle Omada Controller 3.2.3.

Bundled Firmware:

EAP110_V1, EAP110_V2 EAP110_V4

EAP115_V1, EAP115_V2 EAP115_V4

EAP225_V1, EAP225_V2 EAP225_V3

EAP225-Outdoor_V1

EAP110-Outdoor_V1 EAP110-Outdoor_V3

EAP245_V1 EAP245_V3

EAP115-Wall_V1 (  EAP115-Wall is suitable for EU verison Only.)

EAP225-Wall_V2

EAP320_V1 EAP320_V2

EAP330_V1 EAP330_V2

New Feature/Enhancement:
1. Add "Select Page" feature on the management page of vouchers.
2. Change the default status of "Terms of Service" to uncheck. 
3. Optimize the "Free Authentication Policy" to support URL with suffixes. 
4. Optimize the UI of Backup & Restore and Starting Up page. 

Bug Fixed:
1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log.
2. Fixed the bug that AP may disconnect from OC200 when it is upgrading the firmware.
3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake.

Notes:
1. For OC200 (UN) v1.0 only.
2. To use new features of OC200, you need to upgrade your EAP's firmware to the corresponding version.
3. Your device's configuration won't be lost after upgrading.

OC200(UN)_V1_1.1.1 Build 20190419
Ngày Phát Hành: 2019-05-15 Ngôn Ngữ: English File Size: 107.65MB

Bundle Omada Controller 3.1.13, click HERE for Controller release notes.

Bundled Firmware:

EAP110_V1, EAP110_V2 EAP110_V4

EAP115_V1, EAP115_V2 EAP115_V4

EAP225_V1, EAP225_V2 EAP225_V3

EAP225-Outdoor_V1

EAP110-Outdoor_V1 EAP110-Outdoor_V3

EAP245_V1 EAP245_V3

EAP115-Wall_V1 (  EAP115-Wall is suitable for EU verison Only.)

EAP225-Wall_V2

EAP320_V1 EAP320_V2

EAP330_V1 EAP330_V2

 

New Feature/Enhancement:

1. Add RADIUS Accounting.

2. Add Controller migrate and Site migrate.

3. Add log for some of portal authentication results.

4. Support POST request for External Web Portal.

5. Optimize Site Management to allow you to import site.

6. Optimize the performance when batch importing MAC address in MAC Filter.

7. Discovery Utility won’t be installed in Controller software installation.

 

Notes:

1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.13.

2. To use Omada Controller 3.1.13 new features, you need to upgrade your EAP's firmware to the corresponding version.

3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

4. Portal configuration will be lost after upgraded to Omada Controller 3.1.13 from 2.4.X or earlier version.

Sử dụng Firmware của bên thứ 3 trên sản phầm TP-Link

Một số firmware chính thức của các sản phẩm TP-LINK có thể được thay thế bằng firmware của bên thứ ba chẳng hạn như DD-WRT. TP-LINK không cung cấp vấn đề hỗ trợ kĩ thuật và đảm bảo hiệu năng cũng như tính ổn định của firmware bên thứ ba. Khi sản phẩm bị hư hại do sử dụng firmware của bên thứ 3 thì chế độ bảo hành sản phẩm sẽ bị vô hiệu.

 

GPL Code

Emulators

Phiên Bản Firmware
Working Mode
Ngôn Ngữ
181016(UN)
-
English
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.