What should I do if I have more than one Deco models

When You Set Up
Updated 11-29-2018 09:45:02 AM
This Article Applies to: 

Under some circumstances, we have more than one Deco models (Deco M5, Deco M9 Plus, etc) in hand and want to use them together in one network topology.

To maximize the overall network performance, at the first place please kindly noted:

1. If we have more than 2 Deco P7 units, and want a powerline backhaul network, choose Deco P7 as the main Deco.

2.  It is recommended not to choose M4R as the main Deco if we have higher priority models.

 

There are two situations and it is recommended to do as follows:

 

When we’re about to create a new Deco network

Choose a main Deco in the priority order below, then follow instructions of Deco app to set it up first.

Deco M9 Plus / Deco P7 > Deco M5>Deco M4R

 

When we’re about to add Decos to an existing Deco network

For example, if we’ve already set up a M5 network, we could also add new M9 Plus into the existing mesh network to extend our wireless coverage.

In this case, it’s recommended to reselect M9 Plus as the main Deco to ensure the system performance. (Similarly, we recommend to follow the priority order to reselect the main Deco: Deco M9 Plus / Deco P7 > Deco M5>Deco M4R)

Take “add Deco M9 Plus into the existing M5 network” as an example. Please follow the steps below:

1. Update your Deco app

Go to the App Store or Google Play Store, check and update your Deco app to the latest version.

2. Add M9 Plus into the M5 network.

Tap here to add the M9 Plus unit.

“here” link to FAQ1590

 

If you get stuck on “we couldn’t find Deco”, please tap TRY AGAIN. And a new option called “use Bluetooth” will appear. Tap the new option and walk through the steps to complete the setup.

3. Update M9 Plus

Find and tap the Settings icon in the bottom right corner, then click Update Deco.

The app will search the firmware updates automatically. If a new firmware is available for Decos, please download and upgrade them through the Deco app.

When the updates are completed, the app will remind that your firmware version is up-to-date.

4. Set M9 Plus as the main Deco.

Make sure your phone is connected to the Deco Wi-Fi, then open the Deco app.

On the main page, tap Internet. Then tap the “” icon in the upper right corner, select Set Main Deco.

 

Select the M9 Plus unit, and then click CONTINUE. After that, please connect the M9 Plus unit to your modem or Ethernet outlet instead of the previous main M5 unit.