Download voor TD-W8950N V1

Selecteer uw hardware versie:

V1

>Hoe vind ik de hardware versie van een TP-Link product?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Product Overview
Document

Setup Video

  • How to turn a router into an Access Point?

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    Hoe vind ik de hardware versie van een TP-Link product?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
TD-W8950N_V1_160203
Publicatiedatum: 2016-02-03 Taal: Engels Bestandsgrootte: 5.93 MB

Modifications and Bug Fixes:

New features/Enhancement:
  1. Added switch for TR69 enable/disable.
  2. Added Arp Binding function(Advanced -->Security-->ARP Binding).
  3. Increased the Pre_share key length from 15 to 255 in IPsec VPN.
  4. Added Firewall switch in ppp connection.
  5. Added Iran in wireless country option.
Bug Fixed:
  1. Fixed the bug when setting PPPoE\L2TP\PPTP password with 31 special characters in Quick Setup ,the WAN configuration shows
  2. Fixed the bug that guest network  page is incomplete within Google Chrome
  3. Fixed the bug that  URLs are limited to 10 in URL filter of parental control
  4.Fixed the bug with DDNS updating

Notes:

1. For TD-W89950N(UN)_V1
2. Your device’s configuration won't be lost after upgrading,which means you needn't to configure your device again after upgrading
TD-W8950N_V1_150205
Publicatiedatum: 2015-02-05 Taal: Engels Bestandsgrootte: 5.77 MB

Modifications and Bug Fixes:

Bug Fixed:
1.Fixed the bug that IP address couldn't be saved in the IP filter when using IP+Mask format.
2.Fixed the bug that wireless is not available after reboot when wireless schedule was enabled.
3.Fixed the bug that DDNS account couldn't be saved when the password contained '#'.
4.Fixed the bug that when the main nework was disabled ,the guest network still shown wrongly as enabled.
5.Fixed the bug that in some applications DNS will work improperly.
6.Fixed the bug that the router will not dial up again when PPPoE authentication failed.
7.Fixed the bug that the wireless in Quick Setup will automatic disabled after 10mins.When enable it,the SSID is empty and not encrypted.
8.Fixed the bug that the router doesn't limit the unsupported characters in DDNS domain name.
9.Fixed the bug that bandwidth control of Guest network could not take effect.
10.Fixed the bug that the router would forward the packets to other LAN ports which were supposed to forward to the WLAN. 

Notes:

1. For TD-W8950N V1
2. Old firmware’s configuration file can be imported into this new firmware.
3. Your device’s configuration won't be lost after upgrading, which means you needn't to configure your device again after upgrading. 
TD-W8950N_V1_140106
Publicatiedatum: 2014-01-06 Taal: Engels Bestandsgrootte: 5.81 MB

Modifications and Bug Fixes:

  1. First firmware for TD-W8950N V1

Gebruik van Firmware van Derde Partijen in TP-Link Producten 

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen. 

Open Source Code voor Programmeerders (GPL)

 

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

GPL Code

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

AbonneerTP-Link hecht veel waarde aan privacy. Voor meer informatie over ons privacybeleid kan je onze Privacy Policy bekijken.

Krijg updates over nieuwe producten, samenwerkingen en ander interessant nieuws

From United States?

Check products and services for your region.