Search
Search

Why do I failed to upgrade the firmware of the TP-Link ADSL2+ modem router

User Application Requirement
Updated 07-13-2017 03:15:17 AM 74926
This Article Applies to: 
The firmware upgrading fails, it may be caused by the following issue:
 
1.   The format of the firmware is incorrect.
 As for Trendchip solution, you will come across the error massage “You put a  wrong file”.
 
As for Broadcom solution, you will see “Image Uploading failed. The selected file contains an illegal image.”
 
Please check the file you use to update the modem, if it ends with *.zip, please try to extract the zip file by the following steps.
Step 1
Please right click on the zip file and go to Extract to
 
Step 2
then the rar software will ask you to choose the destination folder  to  save the firmware file. And we choose Desktop--->click
A:
As for Trendchip solution,  the correct-format of firmware is ras, like the following picture:
B:
As for Broadcom solution, the correct-format firmware ends with *.up, like the following picture:
 
 
2.   Wrong hardware issue.
As for Broadcom solution, you will come across the following error massage “Image Uploading failed. The selected file contains an illegal image.”
 
As for Trendchip solution, you will come across the following erros massage:“Error:FAIL TO UPDATE DUE TO…The upload file was not accepted by the router.”
 
Step 1
Please try to verify the hardware version of the modem you have:
 
Step 2
Select the corresponding hardware version on the download website:
 

If webpage takes a long time to respond during the firmware upgrading, please try another web browser. 

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

SubscribeTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

Let's Connect

About Us
Press
Partners
Learning Center
United States / English
Copyright © 2020 TP-Link Corporation Limited. All rights reserved.