How to limit ports on TP-Link Wireless Router

User Application Requirement
Updated 05-24-2016 08:36:13 AM 99149
This Article Applies to: 

Step1 Open the web browser and type the LAN IP address of the router in the address bar, the default IP address of TP-Link router is 192.168.1.1, and then press Enter.

 

 

 

Step 2 Type the username and password in the login page, the default username and password both are admin.

Step 3 Click Security->Firewall on the left page.

Step 4 Select Enable Firewall, Enable IP Address Filtering, Allow the packets not specified by any filtering rules to pass through the router.

Step 5 Click Save to save the settings.

Step 6 Click IP Address Filtering on the left of the page.

Step 7 Click Add New to set the IP Address Filtering rule.

Step 8 Type the IP Address which you would like to limit service on your computer and the WAN Port as service port. Then select Deny of the Action.

Step 9 Click Save to save the settings.

 

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Is this faq useful?

Your feedback helps improve this site.