-
Home Devices
SOHO Switches
Keeping your home wired for quality connections
Accessories
Everything else you need for a connected lifestyle
-
Smart Home
Cloud Cameras
Keeping an eye on what matters
Smart Plugs
Smarten up your home devices
Smart Bulbs
Light for every occasion
-
Business Solutions
JetStream Switches
High-Speed wired networking from L3 managed to unmanaged
Omada EAP Series
Professional business Wi-Fi with centralized management
Pharos Wireless Broadband
Ideal for long range wireless broadband networking
SafeStream Router
Secure VPN and Load Balance gateways to the business
-
Service Provider
What can I do if I forget the login password of TP-Link Wireless Router?
User Application Requirement
Updated 11-25-2020 06:41:47 AM
2838940
2838940 This Article Applies to:
The default login username and password are both “admin”. If you have changed the login password, there is no way to find it. You need reset it to factory default and configure it as a new one.
Directly press and hold the reset button on the rear panel with a pin for approximately 10 seconds when the device is running.
.jpg)
Release the reset button and wait for the device to reboot.
Note:
1. Make certain that the router is powered on before it restarts completely. 2. The default IP address is 192.168.0.1(or http://tplinkwifi.net ), and the default login username and password both are admin (all lower case).
3. Ensure that the IP address of your computer is in the same subnet with the device. It means that your computer has an IP address 192.168.0.X (X is in range of 2~253), and the subnet mask is 255.255.255.0.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Is this faq useful?
Your feedback helps improve this site.
Your feedback helps improve this site.