Descarga para EAP115
IMPORTANTE: La disponibilidad del modelo y la versión de hardware varía según la región. Consulte el sitio web regional de TP-Link para determinar la disponibilidad del producto.
Setup Video
-
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
More Fold
Preguntas Frecuentes
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Default Ports for EAP Controller
- How to configure Multicast Filtering on Omada Controller
- How to choose EAP products
- How to build a Factory Network using TP-Link products
- How to build a Network for Restaurant & Cafe using tp-link products
- How to build a Campus Network using TP-LINK products
- How to build a Wireless Network for Chain Store using tp-link products
- How to build a Wireless Network for Dormitory using tp-link products
- How to build a Wireless Network for School Canteen using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- Troubleshooting guide of roaming
- Troubleshooting guide of common wireless issues
- How to downgrade firmware of EAP if it is abnormal after the update
- Overview of Omada EAP Power Supply
- Explanation of portal authentication failure after EAP is extended with Range Extenders
- How to use iPerf to test the speed between the EAP and the wireless client
- Common questions about TP-Link EAP device when it’s used in home network
- What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP?
- Troubleshooting of wireless issues for Omada EAP products
- How to view detailed client information of an EAP
- What can I do if I fail to log in to the EAP via the domain name?
- How do I upgrade the firmware of my EAP device via web browser?
- What is TP-Link EAP/CAP MU-MIMO?
- What is TP-Link EAP Beamforming?
- What is TP-Link EAP/CAP Airtime Fairness?
- Q&A for TP-Link Omada App
- Should I Keep the Omada Controller Running After Configuration?
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- Basic introduction to AP Mesh and Fast Roaming
- Why my clients don't roam or connect to the nearest AP
- Do I need to keep Omada Controller running when using portal authentication?
- What Is the difference between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- What should I do if I got a certificate error?
- Frequently asked questions of EAP Series Access Points
- Troubleshooting for Wireless Client Cannot Access the Internet
- Unable to connect to EAP WiFi
- How to optimize wireless performance of EAP products
- How do I find the firmware version of my EAP device?
- Announcement on Discontinuation of Facebook Wi-Fi
- API and Code Sample for External Portal Server (Omada Controller 2.6.0 to 3.2.17)
- API and Code Sample for External Portal Server (Omada Controller 2.5.4 or below)
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 3.0.5 or below)
- How to set Access Control to create guest SSID on Omada Controller/EAP
- How to configure Management VLAN in Standalone mode for EAP
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- An Example for theFree Authentication Policy Configuration on EAP (Cluster mode)
- How to Configure the Portal Function on the EAP (Cluster mode)
- How to deploy EAP controller on a private cloud (AWS EC2)
- How to set up different SSIDs and Passwords for each EAP through EAP Controller
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility) (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138) (Old UI)
- How to manage EAPs in different VLANs using Omada Controller (Old UI)
- How to Change the Language of the Printed Voucher Code
- How to Configure Band Steering on TP-Link Omada Controller
- How to Configure Load Balance on Omada Controller
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller
- How to Install TP-Link Omada Discovery Utility on Windows and macOS PCs
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility) (New UI)
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138) (New UI)
- What if I forget the password of EAP Controller?
- How to configure the WLAN Group function on Omada Controller (V3 or below version)
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- What should be noticed when running the EAP Controller for the first time?
- How to adopt EAP in Controller Mode?
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- Source code template for External Web Portal (Standalone Mode)
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- How to set up rate limit through EAP controller
- How Do I Log into the Web Management Page of the EAP (Cluster mode)?
- How to configure free authentication policy on EAP Controller
- Understanding and Configuration of Cluster Mode
- How to Manage EAPs at Different Locations
- Hotspot authentication for multiple subnet with different VLANs
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.