Omada AC1200 Wireless MU-MIMO Wall-Plate Access PointSetup Video
-
How to manage TP-Link EAPs centrally via the Software Controller
This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
• Install the Software
• Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
• Configure Software Controller
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Software Controller
• Mass EAPs (usually more than three)
Learn More
-
How to set up a TP Link EAP via your mobile phone
This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
• Connect the EAP to the network
• Download the Omada APP
• Connect to the EAP's wireless network
• Set up the EAP using the Omada APP
THIS VIDEO APPLIES TO:
• All TP-Link EAP models. (except EAP120 and EAP220)
• A small number (1-3) of EAPs.
Learn More
-
How to setup the OC200 via a web browser
This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
• Connect the OC200 to your local network.
• Get ready for setup.
• Create a TP-Link ID.
• Log into your TP-Link ID.
• Add the OC200 to your TP-Link ID.
• Follow the wizard to set up the OC200.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Cloud Controller OC200
• Mass EAPs (usually more than three)
Learn More
-
How to setup the OC200 via your mobile phone
This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
• Connect the OC200 to your local network.
• Get ready for setup.
• Create a TP-Link ID.
• Log into your TP-Link ID.
• Add the OC200 to your TP-Link ID.
• Follow the wizard to set up the OC200.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Cloud Controller OC200
• Mass EAPs (usually more than three)
Learn More
-
How to manage TP-Link EAPs centrally from a remote place via a web browser
You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Controller Software (version 3.0.2 or above)
• Mass EAPs (usually more than three)
Learn More
-
A Quick Overview of EAP Management Methods
This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
Here are 3 most common scenarios and their corresponding methods:
• Manage 1 or 2 EAPs locally
• Manage 3 or more EAPs locally
• Manage 3 or more EAPs remotely
When choosing the method, consider the following questions:
1. Standalone Mode or Controller Mode?
2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
3. What kind of user interface will you use, a web browser or the Omada app?
Learn More
-
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
Learn More
FAQs
- How to manage EAPs in different VLANs using Omada Controller? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138)? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility)? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138)? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility)? (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138)? (Old UI)
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility)? (Old UI)
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility)? (New UI)
- Frequently asked questions of EAP Series Access Points
- Q&A for TP-Link Omada App
- How to adopt EAP in Controller Mode?
- How to view detailed client information of an EAP?
- How to set up rate limit through EAP controller
- What Is the Difference Between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- How to set Access Control to create guest SSID on Omada Controller/EAP
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- How to configure the WLAN Group function on the Software Controller (or OC200)
- Troubleshooting of Wireless Issues for Omada EAP Products
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- What should I do when the controller fails to discover the EAP?
- How to configure the portal function on Omada Controller?
- How to successfully open Omada Discovery Utility?
- How to optimize wireless performance of EAP products
- Will the Configuration Still Work with EAPs When the Omada Controller Goes Offline?
- What if I forget the password of EAP Controller?
- How to Configure Voucher Authentication on Omada Controller?
- Do I need to keep controller running when using portal authentication?
- How to set up different SSIDs and Passwords for each EAP through EAP Controller?
- Source code template for External Web Portal (Controller 3.0.5 or below)
- The Requirements of Establishing an External Portal Server (above Omada Controller 2.6.0)
- What Can I Do If I Fail to Log In to the EAP via the Domain Name?
- Source code template for External Web Portal (Standalone Mode)
- What is Fast Roaming of TP-Link Business Wi-Fi Products?
- How to Configure Omada Controller as a Windows Service（above Controller 2.5.4）
- What should I do if I got a certificate error?
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Language of the Printed Voucher Code？
- How to Configure Load Balance Omada Controller?
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller?
- How do I upgrade the firmware of my EAP device via web browser?
- How do I find the firmware version of my EAP device?
- How to choose EAP products
- How to configure free authentication policy on EAP Controller
- What is TP-Link EAP/CAP MU-MIMO?
- What is TP-Link EAP Beamforming?
- What is TP-Link EAP/CAP Airtime Fairness?
- How to Configure Band Steering on TP-Link Omada Controller?
- What should be noticed when running the EAP Controller for the first time?
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- How to deploy EAP controller on a private cloud (AWS EC2)?
- How to build a Wireless Network for School Canteen using tp-link products?
- How to build a Wireless Network for Chain Store using tp-link products?
- How to build a Factory Network using TP-Link products?
- How to build a Wireless Network for Shopping Mall using tp-link products?
- How to build a Wireless Network for Dormitory using tp-link products?
- How to build a Network for Restaurant & Cafe using tp-link products?
- How to build a Campus Network using TP-LINK products?
- How to Manage EAPs at Different Locations
- How to Change the Default Ports for EAP Controller?
- Hotspot authentication for multiple subnet with different VLANs
Q&A
Feature Configuration Guide
- Introduction of EAP Adoption
- Configuration Guide for Facebook Portal on Omada Controller 2.6.x
- How To Configure Cloud Access for Remote Management
- Methods for Managing the Omada EAPs Network
- Quick Start Guide_Standalone_EAP
- Managing System_Standalone EAP
- Managing EAP_Standalone EAP
- Configuring EAP_Standalone EAP
- Application Example_ Standalone EAP