How to set up OpenVPN Server on Deco APP

Deco BE65-Outdoor , Deco X20 , Deco BE65-5G , Deco X68 , Deco WM9000 , Deco PX50 , Deco BE95 , Deco BE75 , Deco BE5000 , Deco BE65-PoE , Deco BE65 Pro , Deco W8100 , Deco BE25-Outdoor , Deco X3000 , Deco XE70 Pro , Deco BE11000 , Deco XE75 , Deco X95 , Deco X55 Pro , Deco BE25 , Deco XM50 , Deco X50 , Deco BE68 , Deco X75 , Deco X55 , Deco BE85 , Deco X50-PoE , Deco BE65 , Deco XE75 Pro , Deco XE200 , Deco X20-Outdoor , Deco BE22 , Deco BE9300 , Deco WB10800 , Deco X50-Outdoor , Deco X80 , Deco BE3600 Pro , Deco X60
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
OpenVPN is an open-source virtual private network (VPN) software that utilizes SSL/TLS protocols for encrypted communication. It provides secure remote access and site-to-site connections and is widely used for protecting network communication and access control.
Please follow the steps below to set up the OpenVPN Server on Deco APP.
1. Launch the Deco app. Go to MORE > Advanced > VPN Server, and tap Add VPN Server.
2. We recommend enabling DDNS (Dynamic Domain Name System) to bind your WAN IP to a domain name. This can prevent issues with your WAN IP changing, which might otherwise cause VPN connection problems.
Please refer to this link: https://www.tp-link.com/support/faq/3481/
3. Select OpenVPN, enter the necessary information and save the settings.
- Description: Enter a name for this VPN.
- Service Type: Select the service type (communication protocol) for OpenVPN: UDP/TCP.
- VPN Port: Enter a VPN service port to which a VPN device connect, and the port number should be between 1024 and 65535.
- VPN Subnet/Netmask: Enter the range of IP addresses that can be leased to the device by the OpenVPN server.
- Client Access: Select your client access type. Select Home Network Only if you only want the remote device to access your home network. Select Internet and Home Network if you also want the remote device to access internet through the VPN server.
Note: Deco/router does not support UDP's NAT Loopback. If you configure a VPN server on deco using a UDP-based VPN protocol, and try to connect to the server from the local network, you will not be able to connect. If there is a need to connect to the server from the LAN side, Select TCP in Service Type.
4. Tap the VPN you have saved and tap Export Config File to save the OpenVPN configuration file which will be used by the remote device to access your router.
Câu hỏi thường gặp này có hữu ích không?
Phản hồi của bạn giúp cải thiện trang web này.
Mối quan tâm của bạn với bài viết này là gì?
- Không hài lòng với sản phẩm
- Quá phức tạp
- Tiêu đề khó hiểu
- Không áp dụng cho tôi
- Quá mơ hồ
- Khác
Cảm ơn
Chúng tôi đánh giá cao phản hồi của bạn.
Nhấp vàođây để liên hệ với bộ phận hỗ trợ kỹ thuật của TP-Link.
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
Your Privacy Choices
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
Những cookie này cần thiết để trang web hoạt động và không thể tắt trong hệ thống của bạn.
TP-Link
accepted_local_switcher, tp_privacy_banner, tp_privacy_base, tp_privacy_marketing, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
Youtube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
Cookie phân tích cho phép chúng tôi phân tích các hoạt động của bạn trên trang web của chúng tôi nhằm cải thiện và điều chỉnh chức năng trang web của chúng tôi.
Các cookie tiếp thị có thể được các đối tác quảng cáo của chúng tôi thiết lập thông qua trang web của chúng tôi để tạo hồ sơ về sở thích của bạn và hiển thị cho bạn các quảng cáo có liên quan trên các trang web khác.
Google Analytics & Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads & DoubleClick
test_cookie, _gcl_au
Meta Pixel
_fbp
Crazy Egg
cebsp_, _ce.s, _ce.clock_data, _ce.clock_event, cebs
lidc, AnalyticsSyncHistory, UserMatchHistory, bcookie, li_sugr, ln_or