How do I install TP-Link Tri-Band Gaming Router to work with a DSL Modem (Static IP)?

Configuration Guide
Updated 07-24-2019 06:14:02 AM

Note:

1. Please make sure your DSL modem is synchronized with the internet line, otherwise contact your ISP.

2. This article is only suitable when you have DSL modem and connection type is Static IP.

If you have a cable/fiber modem, please click here;

If you have a DSL modem and your ISP provides Dynamic IP address for you, please click here;

If you have a DSL modem and you need to dial up on the computer to get internet from the modem directly, please click here.

 

Advanced Preparations 

Please refer to the QIG in the packet to connect the hardware.

Here takes Archer AX11000 as demonstration.

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 

2. Follow step-by-step instruction to finish Quick Setup.

Here we select Static IP as Internet connection Type.

Then click Next and enter static IP Address, Subnet Mask, Default Gateway, Primary DNS and Secondary DNS provided by your ISP. Click Next to continue and finish Quick Setup.

Or go to Advanced > Network > Internet. Select Static IP as internet Connection type. Enter all the information provided by your ISP and click Save.

 

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

SubscribeTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.