What is Local Smart Action?

Tapo H200 , Tapo H110 , Tapo H100 , KH100 , Tapo H100M , Tapo H900 , Tapo H500
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
Enhancing Automation with Your Hub
Tapo H100/Kasa KH100 allows for a smooth transition of qualified Automations to Hub management, boosting response times and maintaining reliability, even with network variations or intermittent device disconnections.
How to make your Hub execute Automations
When creating or editing Automations, if the triggers and actions meet the following situations, your Hub will automatically take over the execution.
Triggers |
|
Motion Sensor |
Motion Detected |
No Motion Detected for a Set Time |
|
Contact Sensor |
Open |
Close |
|
Triggered |
|
Kept Open for 1 Min |
|
Kept Open for a Set Time |
|
Water Leak Sensor |
Water Leak Detected |
Water Leak Solved |
|
Temperature and Humidity Sensor |
Temperature above |
Temperature below |
|
Humidity above |
|
Humidity below |
|
Button |
Single Tap |
Double Tap |
|
Rotate Clockwise |
|
Rotate Counterclockwise |
|
Hub |
Ring |
Actions |
|
Lighting |
Turn On |
Turn Off |
|
Turn On/Off |
|
Turn on and customize lighting |
|
Remain on for a set time |
|
Brightness + |
|
Brightness - |
|
Color Temperature + |
|
Color Temperature - |
|
Random Color |
|
Plug, Switch
|
Turn On |
Turn Off |
|
Turn On/Off |
|
Remain on for a set time |
Notes:
- Ensure that your Hub is updated to the latest firmware version.
- Once the Hub takes over the execution of Automations, your Automation will be marked with a symbol (
for Kasa /
for Tapo) for easy identification
- Custom settings are currently not available. If the conditions are not met after modification, it will no longer be executed by the Hub.
-
The progress of compatibility with Local Smart varies for different device models and hardware/firmware versions, as well as its supported skills. For specific compatibility updates, please follow the product firmware updates.
Important Notices:
- Automations taken over by the Hub can continue to execute reliably during network fluctuations or temporary device disconnections. However, they cannot fully replace cloud-based Automations that require internet access. Therefore, it is not recommended to rely solely on Hub-executed Automations in offline situations.
- Once an Automation is assumed by the Hub, you will not be able to edit or delete it if the Hub is disconnected from both the network and the cloud. However, you can resume editing the Automation once the hub is back online.
- If the Hub powers off, Automations taken over by the Hub cannot be executed. After the Hub restores power, certain Automations with Effect Time or Time Trigger settings will require the Hub to reconnect to the network and accurately synchronize the time before they can execute properly.
- If your home router has network segmentation or disabled device-to-device communication settings, Automations will not be taken over and executed by the Hub.
- Ensure that your Hub is updated to the latest firmware version.
คำถามที่พบบ่อยนี้มีประโยชน์หรือไม่?
ความคิดเห็นของคุณช่วยปรับปรุงเว็บไซต์นี้
คุณกังวลอะไรเกี่ยวกับบทความนี้?
- ไม่พอใจกับผลิตภัณฑ์
- ยุ่งยากเกินไป
- มีชื่อเรื่องที่สับสน
- ใช้ไม่ได้กับฉัน
- คลุมเครือเกินไป
- อื่น ๆ
ขอบคุณ
เราขอขอบคุณสำหรับคำติชมของคุณ
คลิกที่นี่ เพื่อติดต่อฝ่ายสนับสนุนด้านเทคนิคของ TP-Link
เว็บไซต์นี้ใช้คุกกี้เพื่อปรับปรุงการนำทางเว็บไซต์ วิเคราะห์กิจกรรมออนไลน์ และมอบประสบการณ์การใช้งานที่ดีที่สุดแก่ผู้ใช้บนเว็บไซต์ของเรา คุณสามารถปฏิเสธการใช้คุกกี้ได้ตลอดเวลา คุณสามารถดูข้อมูลเพิ่มเติมได้ใน นโยบายความเป็นส่วนตัว ของเรา อย่าแสดงอีก
เว็บไซต์นี้ใช้คุกกี้เพื่อปรับปรุงการนำทางเว็บไซต์ วิเคราะห์กิจกรรมออนไลน์ และมอบประสบการณ์การใช้งานที่ดีที่สุดแก่ผู้ใช้บนเว็บไซต์ของเรา คุณสามารถปฏิเสธการใช้คุกกี้ได้ตลอดเวลา คุณสามารถดูข้อมูลเพิ่มเติมได้ใน นโยบายความเป็นส่วนตัว ของเรา อย่าแสดงอีก
คุกกี้พื้นฐาน
คุกกี้เหล่านี้จำเป็นต่อการทำงานของเว็บไซต์และไม่สามารถปิดการใช้งานในระบบของคุณได้
TP-Link
accepted_local_switcher, tp_privacy_base, tp_privacy_marketing, tp_smb-select-product_scence, tp_smb-select-product_scenceSimple, tp_smb-select-product_userChoice, tp_smb-select-product_userChoiceSimple, tp_smb-select-product_userInfo, tp_smb-select-product_userInfoSimple, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
แชทสด
__livechat, __lc2_cid, __lc2_cst, __lc_cid, __lc_cst, CASID
Youtube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
คุกกี้การวิเคราะห์และการตลาด
คุกกี้การวิเคราะห์ช่วยให้เราวิเคราะห์กิจกรรมของคุณบนเว็บไซต์ของเราเพื่อปรับปรุงและปรับการทำงานของเว็บไซต์ของเรา
คุกกี้การตลาดสามารถตั้งค่าผ่านเว็บไซต์ของเราโดยพันธมิตรโฆษณาของเราเพื่อสร้างโปรไฟล์ความสนใจของคุณและแสดงโฆษณาที่เกี่ยวข้องกับคุณบนเว็บไซต์อื่นๆ
Google Analytics, Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads และ DoubleClick
test_cookie, _gcl_au
Meta Pixel
_fbp
Crazy Egg
cebsp_, _ce.s, _ce.clock_data, _ce.clock_event, cebs
lidc, AnalyticsSyncHistory, UserMatchHistory, bcookie, li_sugr, ln_or