-
Voor Thuis
-
Smart Home
Camera
Keeping an eye on what matters
Smart Plugs
Smarten up your home devices
Smart Bulbs
Light for every occasion
-
Voor Zakelijk
Switches
High-Speed wired networking from L3 managed to unmanaged
Omada Cloud SDN
The smarter cloud solution for business networking
Pharos Wireless Broadband
Ideal for long range wireless broadband networking
SafeStream Router
Secure VPN and Load Balance gateways to the business
-
Voor Service Providers
ADSL
Capable of high-speed network and integrated broadband applications
3G/4G
Behoud internettoegang, waar u ook bent.
PON
The leading technology for delivering gigabit Internet services
Powerline Adapter
Transformeert via het elektrische circuit het netwerk signaal.
Range Extender
Easily expand your Wi-Fi coverage.
Switches
Vergroot uw zakelijk netwerk met premiumprestaties.
Business Wireless
Brengt uw enterprise Wi-Fi naar een totaal nieuw niveau.
How to reset TP-Link Kasa smart bulb?
There are two types of reset available: a soft reset which does not erase the current settings, and a factory reset that erases all of your custom settings and restore them to factory defaults.
Please refer to the following video [How to Reset a TP-Link Kasa Smart WiFi Light Bulb] to get more detailed information:
3&5 times:
5&10 times:
Or please refer to those steps to reset the bulb:
For LB130、KL110B 1.0、KL120、KL110 1.0、KL130B 1.0、KL130 1.0、LB230、LB110、LB100TKIT、LB200、LB100
To reset the Smart Wi-Fi LED Bulbs without losing the configuration settings:
1. Turn the light switch controlling the bulb to the OFF position.
2. Flip the light switch on and off 3 times
To reset the Smart Wi-Fi LED Bulbs to factory defaults:
1. Turn the light switch controlling the bulb to the OFF position.
2. Flip the light switch on and off 5 times
For KL50、KL110B 2.0、KL430 1.0、KL60、KL60B、KL110 2.0、KL130B 2.0、KL130 2.0、KL50B、KL125 1.20、KL125 2.0
To reset the Smart Wi-Fi LED Bulbs without losing the configuration settings:
1. Turn the light switch controlling the bulb to the OFF position.
2. Flip the light switch on and off 5 times
To reset the Smart Wi-Fi LED Bulbs to factory defaults:
1. Turn the light switch controlling the bulb to the OFF position.
2. Flip the light switch on and off 10 times
When resetting the bulb, please do not switch the bulb on and off too quickly, the time duration is around 1s.
For the KL430, please press and hold the button on the controller for 10 seconds until the Light Strip animates orange and green to enable Setup Mode.
Your feedback helps improve this site.
AbonneerTP-Link hecht veel waarde aan privacy. Voor meer informatie over ons privacybeleid kan je onze Privacy Policy bekijken.
Krijg updates over nieuwe producten, samenwerkingen en ander interessant nieuws