Changing Channel and Channel Width Settings on a TP-Link Router (Blue GUI)

Configuration Guide
Updated 08-02-2024 08:47:17 AM FAQ view icon310585

A wireless channel determines which operating frequency will be in use. It is not necessary to change the channel unless you’re noticing interference problems with nearby access points. The Channel Width setting is preset to automatic, allowing the client’s channel width for to adjust automatically.

Related Article: Changing Channel and Channel Width on a TP-Link Router (new logo)

Old Blue GUI

Step 1: Click Advanced.

Click Advanced

Step 2: Click Wireless 2.4GHz, then Wireless Settings. Change your Channel and Width settings to preference, then click Save.

Change the Channel (channels 1, 6 and 11 are generally best, but any channel can be used). Also, change the channel width to 20MHz.

Click Wireless 2.4GHz

Step 3: Repeat for Step 2 for 5GHz if your 5GHz network has interference problem.

Note :For 5GHz, we recommend you use channel in Band 4, which is channel 149-165, if your router is US version.

icon

New Blue GUI

Step 1: Click Advanced.

Click Advanced

Step 2: Click Wireless, then Wireless settings. Chose Band, then set your Channel and Width settings to preference and click Save.

Change the Channel (channels 1, 6 and 11 are generally best, but any channel can be used). Also, change the channel width to 20MHz

Click Wireless

Step 3: Repeat for Step 2 for 5GHz if your 5GHz network has interference problem.

Note :For 5GHz, we recommend you use channel in Band 4, which is channel 149-165, if your router is US version.

icon

Step 4: Click the reboot button, located at the upper right corner of the screen to apply your changes.

Click the reboot button

Is this faq useful?

Your feedback helps improve this site.

From United States?

Get products, events and services for your region.