Search
Search

How to configure Bandwidth Control on 3G/4G Wireless Router TL-MR3420 (new logo)?

Configuration Guide
Updated 10-26-2017 08:58:21 AM 10121
This Article Applies to: 

Note: TL-MR3420_V5 is used for demonstration in this article.

1. Visit http://tplinkwifi.net, and log in with the password you set for the router. For details, please refer to How to log in to the web-based interface of Wi-Fi Routers (new logo)?

2. Go to Advanced > Bandwidth Control.

3. Enable Bandwidth Control and enter the Total Upstream Bandwidth and Total Downstream Bandwidth.

4. Click Save.

To set controlling rules:

Click Add and fill in the blanks.

• IP Range: Enter the IP range of your devices that you want to apply Bandwidth Control to.

• Port Range: Enter the Port range of the protocols.

• Protocol: Select the protocols of services that you want to control.

• Priority: Select priority from 1 to 5. 1 means the highest priority.

• Upstream/Downstream: Enter the minimum and maximum upstream/ downstream bandwidth you want to allocate.

Click Save.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

AbonneerTP-Link hecht veel waarde aan privacy. Voor meer informatie over ons privacybeleid kan je onze Privacy Policy bekijken.

Krijg updates over nieuwe producten, samenwerkingen en ander interessant nieuws

Volg Ons

Over ons
Pers & Media
Waar te Koop
Learning Center
Nederland / Nederlands
Copyright © 2021 TP-Link Corporation Limited. Alle rechten voorbehouden.

From United States?

Check products and services for your region.

Go Other Option