-
Voor Thuis
Easy ways to expand and enhance your network
Everything else you need for a connected lifestyle
-
Smart Home
Keeping an eye on what matters
Smarten up your home devices
Light for every occasion
-
Voor Zakelijk
High-Speed wired networking from L3 managed to unmanaged
The smarter cloud solution for business networking
Ideal for long range wireless broadband networking
Secure VPN and Load Balance gateways to the business
-
Voor Service Providers
Capable of high-speed network and integrated broadband applications
Behoud internettoegang, waar u ook bent.
The leading technology for delivering gigabit Internet services
Transformeert via het elektrische circuit het netwerk signaal.
Easily expand your Wi-Fi coverage.
Vergroot uw zakelijk netwerk met premiumprestaties.
Brengt uw enterprise Wi-Fi naar een totaal nieuw niveau.
How do I install TL-WR802N/WR810N to work with a cable modem (new logo)?
9775 Preparations:
1．Connect your modem to the WAN/LAN port of the TP-Link router via an Ethernet cable.
2．Power on your router first and then modem.
3. Use the default Wi-Fi Name and Wi-Fi Password printed on the Wi-Fi Info Card to connect your laptop or smart phone to the router.
Check the internet connection on your laptop or smart phone, and please note that:
- If you can access internet without any restriction, no other configuration is required.
- If you're redirected to an authentication page, please complete it to access internet.
Here takes TL-WR802N as an example.
1. Login the router. Please refer to FAQ.
2. Go to Quick Setup and click Next to start.
3. Choose the Wireless Router mode and click Next.
4. Select Dynamic IP as WAN Connection Type, and click Next.
5. Please select to clone the mac address or not and click Next. For other connection types, please enter the parameters provided by your ISP, and then click Next.
6. Either customize your Wireless Network Name and Wireless Password or keep the default ones, and then click Next.
7. Click Finish to complete the configuration. Wait for a few minutes and check the WAN part on the Status page, if it shows any IP address (similar as below), that means the connection between the Router and the Modem is established.
If there is still no wan IP address, please restart your router, wait for about 10 seconds, and then restart your cable modem. After the restarting process, you should get Wan IP address and Internet access.
Note: Some cable modem has a back-up battery inside. To completely restart the cable modem, please take the battery out, and then unplug the power supply.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Your feedback helps improve this site.
AbonneerTP-Link hecht veel waarde aan privacy. Voor meer informatie over ons privacybeleid kan je onze Privacy Policy bekijken.
Krijg updates over nieuwe producten, samenwerkingen en ander interessant nieuws