Search
Search

How to reserve LAN IP Addresses on AC VDSL/ADSL Modem Router (new logo)?

Configuration Guide
Updated 04-18-2019 01:26:32 AM
This Article Applies to: 

You can view and add a reserved address for a client. When you specify an IP address for a device on the LAN, that device will always receive the same IP address each time when it accesses the DHCP server. If there are some devices in the LAN that require permanent IP addresses, please configure Address Reservation on the router for the purpose.

Follow the steps below to reserve an IP address for your device.

Here takes Archer VR2800 as demonstration.

1. Log in the web interface of the modem router. You can refer to How to log into the web-based interface of the AC VDSL/ADSL Modem Router (new logo)?

2. Go to Advanced > Network > LAN Settings page and select IPv4.

3. Scroll down to locate the Address Reservation table and click Add to add an address reservation entry for your device.

4. Enter the MAC address of the device for which you want to reserve IP address.

5. Specify the IP address which will be reserved by the router.

6. Check to Enable this entry and click OK to make the settings effective.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

AbonneerTP-Link hecht veel waarde aan privacy. Voor meer informatie over ons privacybeleid kan je onze Privacy Policy bekijken.

Krijg updates over nieuwe producten, samenwerkingen en ander interessant nieuws

Volg Ons

Over ons
Pers & Media
Waar te Koop
Learning Center
Nederland / Nederlands
Copyright © 2020 TP-Link Corporation Limited. Alle rechten voorbehouden.

From United States (English)?

Check products and services for your region.

Go Other Option