Завантажити для TL-WA1201
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Відео з налаштування
-
How to set up your Desktop AP in Multi-SSID mode
In Multi-SSID mode, the access point creates multiple wireless networks to provide different security and VLAN groups. This mode is suitable when you want your devices connected to different wireless networks and become isolated by VLANs.
More Fold -
How to set up your Desktop AP in Client mode
In Client mode, the access point connects your wired devices to a wireless network. This mode is suitable when you have a wired device with an Ethernet port and no wireless capability, for example, a smart TV, media player, or game console and you want to connect it to the internet wirelessly.
More Fold -
How to set up your Desktop AP in Range Extender mode
In Range Extender mode, the access point extends the range of an existing Wi-Fi network. This mode is suitable when you are in a Wi-Fi dead-zone or a place with weak wireless signal, and you want to have a larger effective range of the wireless signal throughout your home or office.
More Fold
FAQs
- How to Factory Reset Your TP-Link Range Extender or Access Point
- How to Log In to Your TP-Link Access Point at tplinkap.net
- How to Find the Serial Number (S/N) on Your TP-Link Device
- Як дізнатись про версію пристрою TP-Link?
- How to Improve Your Wi-Fi Signal and Wireless Range
- Як змінити ім’я користувача чи пароль пристрою TP-Link?
- Як дізнатися номер моделі вашого пристрою TP-Link?
- Як підключитися до бездротових мереж на різних операційних системах
- What should I do if I don’t receive the verification email for TP-Link ID registration or password reset?
- Why do I need to give Local Network permission to TP-Link apps in iOS devices?
- Why & How do I change the IP address of wireless Access Point & Extender?
- How to connect my Media Player to the wireless network with AP client
- How to upgrade the firmware of TP-Link Access Point
- How to back up and restore the configuration file of TP-Link Access Point
- How to configure Client mode of the Wireless N Access Point (new logo)
- What should I do if I fail to login web interface of TP-Link Wireless Access Point?
- How do I set up Captive Portal on TL-WA1201?
- How to configure Access Point mode of the Wireless N Access Point (new logo)
- How to configure Repeater mode of the Wireless N Access Point (new logo)
- How to configure Multi-SSID mode of the Wireless N Access Point (new logo)
- What should I do if I fail to configure TP-Link Access Point?
- How do I log into the Web-based Interface of Wireless Access Point or Extender(case 2)?
- How do I log into the Web-based Interface of Wireless Access Point or Extender(case 1)?
Емулятори
Версія прошивки |
Working Mode |
Мова |
|
|---|---|---|---|
20200104_AP |
Access Point |
English |
|
20200104_Client |
Client |
English |
|
20200104_Multi-SSID |
Multi-SSID |
English |
|
20200104_RE |
Range Extender |
English |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.