How to schedule your wireless function of Archer MR200 (new logo)

Configuration Guide
อัพเดทแล้ว06-27-2022 08:53:57 AM 26492
บทความนี้ใช้กับ: 

You can automatically turn off your wireless network (both 2.4GHz and 5GHz) at time when you do not need the wireless connection.

1. Please refer to How to log into the web-based management interface of Archer MR200? (new logo)

2. Go to Advanced > Wireless > Wireless Schedule page.

3. Select the 2.4GHz wireless network to configure. Toggle on the button to enable the Wireless Schedule feature.

4. Set the time. Drag the mouse to cover the time area and click Save to make the settings effective. The selected time will be in green.

5. Repeat steps 3 and 4 to set time for 5GHz wireless network.

Note:

1. Please make sure that the time of the router is correct before using this function. For more details, refer to How to configure system time of Archer MR200 (new logo)?

2. If you just set time for one wireless band, the other wireless band is still always on, so set time for both of the two bands to schedule your whole wireless network.

3. The wireless LED will turn off if both wireless networks are disabled.

4. The wireless network will be automatically turned on after the time period you set.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

คำถามที่พบบ่อยนี้มีประโยชน์หรือไม่?

Your feedback helps improve this site.

From United States?

Get products, events and services for your region.