Download for RE550
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Setup Video
-
How to Configure a Range Extender for Starlink
-
How to Set up TP-Link Range Extender RE550 via Tether App
-
How to Set up TP-Link Range Extender RE550 via Web Browser
-
How to Set up TP-Link Range Extender RE550 via WPS
-
How to Set Up TP Link Range Extender via Tether App
-
How to set up a TP-Link Range Extender(No music)
-
How to set up a TP-Link Range Extender
FAQs
- How to Factory Reset Your TP-Link Range Extender or Access Point
- Is Your TP-Link Range Extender Working and in the Right Spot?
- How to Find the Serial Number (S/N) on Your TP-Link Device
- How to Update Your TP-Link Extender Firmware: Three Methods
- How to Find the Hardware Version on Your TP-Link Device
- TP-Link Range Extender Not Working? How to Fix It
- How to Boost Your Wi-Fi Signal: Compare TP-Link Range Extender, Powerline, and Mesh Solutions
- TP-Link Range Extender Not Connecting to Router: Troubleshooting Guide
- How to Place Your TP-Link Wi-Fi Extender for the Best Signal and Performance
- How to Change Your TP-Link Device Admin Password
- How to Find the Model Number of Your TP-Link Device
- General questions about EasyMesh
- How to connect computers/phones to a wireless network
- Fail to configure the TP-Link Range Extender
- What should I do if I don’t receive the verification email for TP-Link ID registration or password reset?
- Why do I need to give Local Network permission to TP-Link apps in iOS devices?
- Explanation of portal authentication failure after EAP is extended with Range Extenders
- How to back up and restore the configuration file of TP-Link Range Extender
- How to configure OneMesh Range Extender via Tether app
- Cannot Find the Host Network When Setting up TP-Link Range Extender
- How to share network on Tether App
- Troubleshooting: The internet connection is unstable when connected to the EasyMesh Network
- How to add an extender to an EasyMesh network as a satellite device
- What If I fail to establish EasyMesh network using TP-Link EasyMesh devices?
- Why is my TP-Link Range Extender not getting the same speed as the main router?
- The Weak Security and Privacy Warning on the iOS14 or iOS15
- Unable to See the Wi-Fi Name or SSID of the TP-Link Range Extender After Configuration
- Fix Unstable Connection on the Range Extender by Changing Router Advanced Features
- Most frequently asked questions about TP-Link range extenders
- How to check whether my Range Extender is using the same SSID with my Router
- What should I do if my range extender does not extend the Wi-Fi coverage?
- My devices are connected to the range extender but no network access
- Different Application Scenarios to use the TP-Link dual band range extender
Apps
- TP-Link Tether
TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices
Note: To use Tether, please update your TP-Link device's firmware to the latest version.
Emulators
Firmware Version |
Working Mode |
Language |
|
|---|---|---|---|
200316(UK) |
- |
Multi-language |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.