Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

Omada_SDN_Controller_V4.4.6_Linux_x64.tar

Download
Data di pubblicazione: 2021-10-11 Lingua: English Dimensioni file: 64.02 MB
Sistema operativo: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9.

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada_SDN_Controller_V4.4.6_Linux_x64.deb

Download
Data di pubblicazione: 2021-10-11 Lingua: English Dimensioni file: 62.28 MB
Sistema operativo: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9.

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

Omada Controller_V4.4.6_Windows

Download
Data di pubblicazione: 2021-09-28 Lingua: English Dimensioni file: 94.07 MB
Sistema operativo: Windows 7/8/10/Server

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware
EAP
EAP110_V4 3.20.0 Build 20200525 Rel.36899 and above
EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above
EAP225_V3 2.20.0 Build 20200422 Rel.70513 and above
EAP245_V3 2.20.0 Build 20200423 Rel.36779 and above
EAP115-Wall_V1 1.20.0 Build 20200509 Rel.63986 and above
EAP225-Wall_V2 1.20.0 Build 20200422 Rel.70504 and above
EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel.33388 and above
EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel.70543 and above
EAP660 HD, EAP620 HD, EAP615-Wall, EAP610, EAP610-Outdoor,
EAP265 HD, EAP230-Wall, EAP235-Wall


Switch
TL-SG3452P, TL-SG3452, TL-SG3428XMP, TL-SG3428MP, TL-SG3428,
TL-SG3428X, TL-SG3210XHP-M2, TL-SG3210 V3, TL-SX3206HPP,
TL-SX3016F, TL-SX3008F, TL-SG2428P, TL-SL2428P V4.2, TL-SG2210MP,
TL-SG2210P V3.2, TL-SG2218, TL-SG2008P, TL-SG2008 V3/4.


Gateway
ER605 (TL-R605), ER7206 (TL-ER7206)


2. Enhancement/Bug Fixed
1) Optimized the algorithm and interval for generating network topology and MAP.
2) Fixed the bug that speed test would cause IPv6 configuration to be deleted.
3) Fixed the link redirection error for resetting Omada Controller accounts.
4) Fixed the bug that the pictures with transparent backgrounds could not be
correctly imported into the Portal.
5) Fixed the bug that the Controller would redirect to the wrong HTTPS port with
an External Web Portal enabled.
6) Fixed that bug that the HTTPS redirection configuration would not be saved after
modifying Portal settings.


Notes
1) Omada SDN Controller can only manage certain devices running the supported
firmware. Please confirm that your device is compatible with the SDN Controller.
2) If you are using old Controller and plan to upgrade to this version, please follow
the procedure of the Omada Controller Upgrade Guide.
3) Once upgraded to this version of Omada Controller, you will be NOT able to
downgrade to version 3.2.14 or below.
4) This version of the controller is applied to the Omada APP of version 3.0.X or
above.

FAQs

Firmware

Un aggiornamento firmware può risolvere problemi, aumentare le performance o introdurre nuove funzionalità.

Come aggiornare

  • È strettamente necessario verificare modello e versione hardware prima di scaricare ed installare ogni firmware.
  • È possibile installare solamente firmware creati per modello e versione hardware in uso.
  • Il caricamento di un firmware non appropriato può danneggiare irrimediabilmente il dispositivo e ne invalida la garanzia.
  • Assicurarsi di non interrompere l’alimentazione del dispositivo e del computer durante l’aggiornamento.
  • I firmware sono scaricabili esclusivamente in formato compresso: è necessario estrarre il firmware aprendo l’archivio compresso tramite un software di decompressione e salvandolo sul desktop.

 

 

ER7206(UN)_V1_1.1.1_20210723

Download
Data di pubblicazione: 2021-07-29 Lingua: English Dimensioni file: 17.72 MB

This firmware is fully adapted to the Omada SDN Controller 4.3.5 or above.

 

New Feature/Enhancement:

1. Add support for Dual Image feature and optimize the Flash design to improve the stability and reliability.

2. Add Emergency mode to recovery the firmware, please refer to FAQ3062.

3. Add support for IPv6.

4. Add support for Daylight Saving Time (DST).

5. Optimize the mechanism of aging UPnP entries.

6. Optimize the priority of One-to-One NAT and IPsec tunnels.

7. New features in controller mode:

7.1 PPTP/L2TP VPN can be selected as the Interface for static route and policy routing.

7.2 Add support to customize the firewall parameters.

7.3 Routing table, VPN, DDNS and Port forwarding status can be displayed on the Insight page.

7.4 Optimize the export of OpenVPN certificate.

8. New features in standalone mode:

8.1 Multi networks are supported.

8.2 LAN-to-LAN ACL are added to manage the behavior between networks, refer to FAQ3061 for Configuration Guide.

 

Bug Fixed:

1. Fix the bug that Omada Gateway cannot be adopted after upgrading the firmware.

2. Fix the bug that the device account was reset after multiple configurations.

3. Fix the bug that TTL of the packets is reduced by 2 after forwarding.

4. Fix the bug that the existing sessions may not be switched to the backup WAN when performing the link backup.

5. Decouple some configurations of WAN and LAN.

5. Fix the bug that Virtual Server, One-to-One NAT and NAT Loopback failed.

6. Fix the bug that Speed Test failed in some circumstances.

 

Notes:

1. For ER7206 (TL-ER7206) v1.0 and v1.6.

2. Your device’s configuration won’t be lost after upgrading.

3. This firmware is applied to the Omada APP of version 3.0.x or above.

ER7206(UN)_V1_1.0.1_20210113

Download
Data di pubblicazione: 2021-03-03 Lingua: English Dimensioni file: 16.76MB

This firmware is fully adapted to the Omada SDN platform but only compatible with Omada controller v4.1.5 or above.

If you are using an old Omada controller and plan to upgrade firmware for EAP, then you must upgrade the Omada controller as well. Please follow Upgrade Guide to upgrade the Omada Controller.

 

New Feature/Enhancement:

1. Support to configure the L2TP VPN Server and IPsec site on the same WAN port.

2. Change the detection mechanism of the “Block Ping of Death” function in the firewall, remove the packet limit of fewer than 64 Bytes.

3. Optimize the Online Detection and DNS proxy mechanisms to improve the network stability for scenarios where the front-end device has a Disconnection Alert function.

4. Optimize for scenarios where the Omada SDN Controller is accessed via the cloud when Portal is enabled.

5. Improve the compatibility of IKEv2 VPN, and the stability of L2TP over IPsec VPN.

6. Improve the network stability when the static IP address is changed in multi-WAN mode.

 

Bug Fixed:

1. Fix the bug that the DHCP Server may down under special circumstances.

2. Fix the bug that the WAN connection may down when multi-network and VPN are configured.

3. Fix the bug that the router doesn’t forward data for up to 2 minutes when the L2TP VPN Client is connected.

4. Fix the bug that the Omada SDN Controller alerts incompatible devices.

5. Fix the bug that CPU and memory usage data are not correctly displayed in the Statistics functions of the Omada SDN Controller.

6. Fix the bug that the router occasionally generates the wrong routing table for the DNS server.

 

Notes:

1. For ER7206(TL-ER7206) v1 only.

2. Your device’s configuration won’t be lost after upgrading.

3. This firmware is applied to the Omada APP of version 3.0.x or above.

 

Codice Open Source (GPL)

I prodotti TP-LINK contengono software sviluppato da terze parti, incluso software distribuito con licenza GPL (GNU General Public Licence versione 1, 2 o 3) o con licenza LGPL (GNU Lesser General Public License): l'utilizzo di questo software è possibile entro limiti e condizioni stabiliti dalla tipologia di licenza con la quale è distribuito e specificate a questo link. È possibile ottenere il codice sorgente soggetto a GPL e la lista dei prodotti che utilizzano tale codice all'interno del Centro sorgenti GPL.

I relativi software sono distribuiti con formula di TOTALE ESCLUSIONE DI GARANZIA; non sono pertanto garantite COMMERCIABILITÀ e/o IDONEITÀ PER QUALSIASI UTILIZZO SPECIFICO.

Per ulteriori informazioni consultare il testo GNU General Public License.

Codice GPL

Emulator

Versione Firmware
Working Mode
Lingua
210426(UN).
-
English

Nota:

1. Questo simulatore è un'interfaccia web virtuale che consente di provare le funzionalità dell'interfaccia di gestione web del dispositivo TP-Link desiderato. Per dettagli relativi a caratteristiche e specifiche di prodotto consultare la pagina del prodotto.

2. Si prega di verificare che la versione del vostro firmware corrisponda alla versione mostrata sull'interfaccia del simulatore. Ogni versione firmware ha la propria interfaccia e funzionalità. Non tutte le versioni firmware sono presenti nel simulatore.

3. Le funzionalità mostrate sono a scopo illustrativo, la loro disponibilità può variare in base a regolamentazioni locali. Per maggiori informazioni sulle specifiche consultare la pagina del prodotto. 

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

Iscriviti alla newsletter TP-Link prende la Privacy seriamente. Per maggiori informazioni sul trattamento dei tuoi dati consulta l'Informativa Privacy.

From United States?

Get products, events and services for your region.