How to set up cloud camera with tpCamera APP?

This article is only suitable for basic configurations.

Note: NC Class Cameras work with tpCamera app only.

Run the tpCamera APP on the Android phone or Iphone

Note: tpCamera APP can only be used in iOS 9.0 or higher/Android 4.4 or higher.

For IOS devices: download the tpCamera APP in APP store

For Android phone: Scan the QR code below or on the camera’s package and an APP downloading link will come up.

Here we take Android as an example to set up the camera:

1) Connect your camera to your router by an Ethernet cable, then connect the phone to the Wi-Fi network of same router.

Note:

1.The NC210 do not have Ethernet port, it can only be configured via Wi-Fi. Please refer to How to set up NC210 with tpCamera APP to setup the NC210.

2.After we configured the camera successfully, if you don’t want the camera connect to the router via Ethernet cable, you can disconnect the Ethernet cable between the router and the camera, and the Camera will connected to the router automatically by Wi-Fi.

2) Log in the tpCamera app with your cloud account, choose “+” to add a new device.