Изтеглете за EAP235-Wall V1

Setup Video

• How to Install the Wall Plate Access Point with Mounting Bracket (EAP615-Wall for demonstration)

  This video will show you how to install your Wall Plate Access Point with Mounting Bracket, using EAP615-Wall for demonstration.

  Повече Fold

• How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller

  This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL

  Повече Fold

• How to manage TP-Link EAPs centrally via the Software Controller

  This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
  • Install the Software
  • Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
  • Configure Software Controller
  
  THIS VIDEO APPLIES TO:
  • All TP-Link EAP models (except EAP120 and EAP220)
  • Omada Software Controller
  • Mass EAPs (usually more than three)
  

  Повече Fold

• How to set up a TP Link EAP via your mobile phone

  This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
  • Connect the EAP to the network
  • Download the Omada APP
  • Connect to the EAP's wireless network
  • Set up the EAP using the Omada APP
  
  THIS VIDEO APPLIES TO:
  • All TP-Link EAP models. (except EAP120 and EAP220)
  • A small number (1-3) of EAPs.
  

  Повече Fold

• How to manage TP-Link EAPs centrally from a remote place via a web browser

  You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
  THIS VIDEO APPLIES TO:
  • All TP-Link EAP models (except EAP120 and EAP220)
  • Omada Controller Software (version 3.0.2 or above)
  • Mass EAPs (usually more than three)
  

  Повече Fold

• A Quick Overview of EAP Management Methods

  This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
  Here are 3 most common scenarios and their corresponding methods:
  • Manage 1 or 2 EAPs locally
  • Manage 3 or more EAPs locally
  • Manage 3 or more EAPs remotely
  When choosing the method, consider the following questions:
  1. Standalone Mode or Controller Mode?
  2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
  3. What kind of user interface will you use, a web browser or the Omada app?
  

  Повече Fold

• How to Set up a TP-Link EAP via Web browser

  This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
  1. Connect the EAP to the network
  2. Log into the EAP (via a wired/wireless connection)
  3. Change the default SSID
  This video is suitable for users with a small number (1-3) of EAPs .
  

  Повече Fold

Feature Filter: Всички Изискване за потребителско приложениеВъпроси и отговори Функции и спецификацииТърсете решениеРъководство за конфигуриранеОфициално изявлениеПомощ

FAQs

• Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 07-07-202312742
• API and Code Sample for External Portal Server (Omada Controller 4.1.5 to 4.4.6) 07-06-202346388
• API and Code Sample for External Portal Server (Omada Controller 2.6.0 to 3.2.17) 07-06-202353112
• API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 4.1.5 or above) 07-06-202347883
• What should I do if I cannot start the Omada Controller in windows system (Controller 4.1.5 or above) 06-07-202358839
• How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above) 04-23-202315861
• How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above) 04-23-202314049
• What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-202313597
• How to use the Ping tool in Omada APP 04-20-202314730
• What is 2FA and how to use it in Omada platform 04-20-202313726
• How to Configure Portal Authentication on Omada Controller 04-14-2023257280
• Should I Keep the Omada Controller Running After Configuration? 04-14-2023133244
• Do I Need to Keep Omada Controller Running When Using Portal Authentication? 04-14-202363880
• Announcement on Discontinuation of Facebook Wi-Fi 04-12-202318034
• How to configure Management VLAN in Standalone mode for EAP 02-21-202315192
• How to configure MAC filtering for EAP in Controller mode 02-21-202313577
• Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS) 09-27-202248572
• How to Configure Voucher Authentication on Omada Controller 07-20-2022183496
• How to Change the Default Ports for EAP Controller 06-28-202265702
• How to Change the Language of the Printed Voucher Code 06-27-202256782
• How to Configure Band Steering on TP-Link Omada Controller 06-27-2022107582
• How to Configure Load Balance on Omada Controller 06-27-202298884
• How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller 06-27-2022134032
• Как да разглеждате подробна клиентска информация на един EAP? 02-12-202059638
• How to Install TP-Link Omada Discovery Utility on Windows and macOS PCs 06-27-2022136055
• How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility) (New UI) 06-27-202265472
• How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138) (New UI) 06-27-202244445
• How to use iPerf to test the speed between the EAP and the wireless client 06-27-202248376
• How to downgrade firmware of EAP if it is abnormal after the update 06-24-202232347
• How to configure the WLAN Group function on the SDN Controller(New UI) 06-24-202223094
• How to set the PVID/VLAN ID for the second port on the EAP 06-24-202225044
• How to disable 5GHz WiFi for Omada EAP 06-24-202241671
• How to configure the WLAN Group function on Omada Controller (V3 or below version) 03-04-202249859
• Overview of Omada EAP Power Supply 02-25-202232836
• What should I do when the Omada Software Controller (V4) fails to discover the devices? 11-23-202181994
• Explanation of portal authentication failure after EAP is extended with Range Extenders 11-22-202130073
• How to configure Multiple SSIDs with Multiple Subnets on EAP products 08-03-2021117636
• What is TP-Link EAP Beamforming? 08-03-202187712
• What should be noticed when running the EAP Controller for the first time? 08-03-202152977
• How to choose EAP products 08-03-2021162317
• How do I find the firmware version of my EAP device? 08-03-202152965
• How do I upgrade the firmware of my EAP device via web browser? 08-03-202184296
• Q&A for TP-Link Omada App 08-03-2021110726
• Troubleshooting of Wireless Issues for Omada EAP Products 08-03-2021148637
• What should I do if I got a certificate error? 08-03-2021114238
• How to adopt EAP in Controller Mode? 08-03-2021107936
• How to back up and restore the configuration and data of your Software Controller (or OC200) 08-03-202170175
• How to Configure Omada Controller as a Windows Service(above Controller 2.5.4) 08-03-2021248503
• Frequently asked questions of Omada SDN solution related to upgrading and management 07-20-202156607
• What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP? 07-20-202163208
• Source code template for External Web Portal (Standalone Mode) 06-10-202145225
• How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI) 03-01-202147694
• How to configure basic wireless settings of my TP-Link EAP in Standalone mode? 09-22-202090668
• How to configure basic wireless settings of my TP-Link EAP via Omada Controller? 09-17-202058438
• Common questions about TP-Link EAP device when it’s used in home network 09-17-202071396
• What is TP-Link EAP/CAP MU-MIMO? 09-02-202089774
• Why my Omada controller cannot manage the latest EAP? 07-10-202054537
• How to set up rate limit through EAP controller 11-11-201988455
• What Is the Difference Between Login Account, Cloud Account, Device Account and User Account in Omada Controller? 11-11-201996810
• How to optimize wireless performance of EAP products 07-01-2019113576
• What Can I Do If I Fail to Log In to the EAP via the Domain Name? 04-02-201959606
• Configure rogue AP detection on EAP/Omada Controller 08-28-201898510
• How to configure free authentication policy on EAP Controller 03-21-201856896
• What is TP-Link EAP/CAP Airtime Fairness? 02-13-2018190100
• How to Manage EAPs at Different Locations 04-28-201675347
• Hotspot authentication for multiple subnet with different VLANs 12-22-201570479

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
  How to find the hardware version on a TP-Link device
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

• 
• 

Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.

Feature Filter: Всички EAP AdoptionFacebook portal authenticationManagementStandalone EAP Log in Edit SSIDEAP reset backup and restore firmware update system time user accountConfigurationConfiguration ExampleQuick Start

Q&A

• Q&A_Basic Wireless Concepts (Omada)

Feature Configuration Guide

• Introduction of EAP Adoption
• Configuration Guide for Facebook Portal on Omada Controller 2.6.x
• How To Configure Cloud Access for Remote Management
• Quick Start Guide_Standalone_EAP
• Managing System_Standalone EAP
• Managing EAP_Standalone EAP
• Configuring EAP_Standalone EAP
• Application Example_ Standalone EAP