2.4GHz High Power Wireless Outdoor CPE TL-WA5210G
- Complies with IEEE 802.11b/g, wireless speed up to 54Mbps
- Outdoor weatherproof and 4000V lightning/15KV ESD protection design
- 12dBi dual-polarized antenna to build long distance WiFi connection up to 2km
- High Power to boost your signal coverage and link speed
- Up to 60 meters (200 feet) of flexible deployment with included Power over Ethernet Injector
TP-LINK High Power Wireless Outdoor CPE is dedicated to WISP CPE solutions and long distance wireless network solutions.
It is an outdoor multi-function access point designed for small businesses,
offices and the home with outdoor networking requirements.
Durable, Reliable Outdoor Wireless Solution
Outdoor Wireless Products are often faced with more extreme environments, including intense heat, rainfall, and even lightening. All of these factors may damage the device, preventing normal operation; while there are many “outdoor products” on the market, there are a large number that cannot operate smoothly in outdoor environments. TP-LINK’s outdoor access point provides stronger protection for durable and reliable operation in more intense outdoor environments. We mean it when we say ‘Outdoor’ Wireless.
Weatherproof Material Design
Built with an outdoor weatherproof enclosure and high temperature durability material inside, including an aluminum antenna and high quality components, the CPE can be used in various weather conditions, from dry to humid, in temperatures from -30 degrees to 70+ degrees.
15KV ESD Protection
Electrostatic discharge is a serious issue in solid state electronics, especially in dry environments. The integrated circuits in products can suffer damage form high electrostatic voltages. TP-LINK’s built-in ESD protection circuit prevents this form happening and ensures reliable operation.
4000V Lightning Protection ＆
Grounding Terminal Integrated
One of the big challenges of outdoor products are thunder storms, where high voltage lightning strikes can damage the device’s integrated circuits from the antenna to the Ethernet ports. TP-LINK provides an integrated grounding terminal and 4000V lightning protection to prevent storm/lightning surges.
The Power to Go the Distance
The outdoor environment is good for wireless transmissions due to line of sight (no barriers) and less signal reflection,
providing the possibility of long distance wireless transmissions.
High Power and High Sensitivity
The device features high power, just like a high-volume speaker to make your sound (wireless signal) travel further; with high sensitivity, just like a high-sensitivity headset, allowing the AP to detect and receive the weakest signals. These two aspects working together, ensure the signals can go further and bring higher speeds at the same distance than normal ones.
12dBi Dual Polarized Antenna
The CPE contains a powerful 12dBi Dual-Polarized antenna located within the casing to provide maximum transmission distances and connection stability. The Dual Polarized antenna can be set to vertical or horizontal to be compatible with a large number of WISPs.
1. WISP Client
Client router mode for WISP service
2. Internet Sharing
Connect ultra-long-distance network over wireless
3. Wireless Surveillance
Long range surveillance over wireless
|Wireless Speed||5GHz 300Mbps||2.4GHz 300Mbps||5GHz 150Mbps||2.4GHz 150Mbps||2.4GHz 54Mbps|
|Memory||64MB DDR2||64MB DDR2||32MB DDR||32MB DDR||16MB DDR|
|External Antenna Interface||-||-||1 * RP-SMA||1 * RP-SMA||1 * RP-SMA|
|Dual Ethernet Ports||√||√||-||-||-|
|Lightning Protection over
|Power Supply||24V Passive PoE
|24V Passive PoE
|12V Power Adapter + Passive PoE Injector|
|Operation Modes||AP / Client / Bridge / Repeater / AP Client Router (WISP Client) / AP Router Mode|
|MAXtream TDMA Mode||√||√||-||-||-|
|Transmit Power Control||Stepping 1dBm||Stepping 1dBm||Stepping 3dBm||Stepping 3dBm||-|
|Iperf Speed Test Tool||√||√||-||-||-|
|Pharos Control Supported
(Central Network Management Application)
|Interface||1 10/100Mbps Auto-Sensing RJ45 Port(Auto MDI/MDIX, PoE)
1 External Reverse SMA Connector One Grounding Terminal
|External Power Supply||12VDC / 1.0A Linear PSU|
|Wireless Standards||IEEE 802.11g, IEEE 802.11b|
|Dimensions ( W x D x H )||10.4 × 4.7 × 3.2 in. (265x120x83mm)|
|Antenna||12dBi Dual-Polarized Directional Antenna|
|Antenna Beamwidth||Horizontal: 60° Vertical: 30°|
|Protection||15kV ESD Protection,
4000V Lightning Protection
Grounding Terminal Integrated
|Signal Rate||11g: Up to 54Mbps(dynamic)
11b: Up to 11Mbps(dynamic)
|Reception Sensitivity||802.11g 54M: -76dBm 48M: -78dBm 36M: -82dBm 12M: -91dBm 9M:-92dBm 802.11b 11M:-90dBm 5.5M:-92dBm 1M:-98dBm|
|Transmit Power||<20dBm (EIRP, For countries using CE Standards)
<27dBm (Peak Output Power, For countries using FCC Standards)
|Wireless Modes||AP Router Mode AP Client Router Mode (WISP Client) AP/Client/WDS Bridge/Repeater mode|
|Wireless Functions||WDS Bridge, Wireless Statistics|
|Wireless Security||SSID Enable/Disable MAC Address Filter 64/128/152-bit WEP Encryption WPA/WPA2/WPA-PSK/WPA2-PSK (AES/TKIP) Encryption|
|Wireless Range||2km with Integrated Antenna 15km Maximum (High gain directional antenna required)|
|Advanced Functions||Up to 60 meters PoE is supported
Provides 4-level signal LED indicator
|Certification||CE, FCC, RoHS|
Power Supply Unit
Quick Installation Guide
|System Requirements||Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC OS, NetWare, UNIX or Linux.|
|Environment||Operating Temperature: -30°C~70°C (-22℉~158℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing