What to do if my floodlight camera cannot power on

Please consult or have it performed by a licensed electrician.

• Make sure you have turned on the circuit breaker.
• Check that the bracket and camera are firmly attached.

• Turn off the circuit breaker and check the wiring. Make sure the Line and Neutral wires are connected correctly. Refer to https://www.tp-link.com/support/faq/3474/ for detailed instructions.

• Turn off the circuit breaker and check that the wires are well-connected to the bracket and the screws are tightened.

• Reset the circuit breaker and verify wires are working properly. Make sure the power supply voltage is 110 V~240 V. It’s recommended to consult or have it performed by a licensed electrician.