Download pentru Omada Software Controller
- Product Overview
- Documente
-
- Omada SDN Controller Software 4.1.5Windows/Linux_User Guide
- Omada Controller Software 3.2.1_User Guide
- Omada Controller Software 3.1.13_User Guide
- Omada Controller Software 3.1.4_User Guide
- Omada Controller Software 3.0.5_Windows/Linux_User Guide
- Omada Controller Software 3.0.2_User Guide
- Omada Controller Software 2.7.0_User Guide
- Omada Controller Software 2.6.0_User Guide
- EAP Controller 2.5_User Guide
- EAP Controller_V2.4.8_User Guide
Setup Video
-
How to manage TP-Link EAPs centrally via the Software Controller
This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
• Install the Software
• Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
• Configure Software Controller
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Software Controller
• Mass EAPs (usually more than three)
Află mai mult
-
How to manage TP-Link EAPs centrally from a remote place via a web browser
You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Controller Software (version 3.0.2 or above)
• Mass EAPs (usually more than three)
Află mai mult
-
A Quick Overview of EAP Management Methods
This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
Here are 3 most common scenarios and their corresponding methods:
• Manage 1 or 2 EAPs locally
• Manage 3 or more EAPs locally
• Manage 3 or more EAPs remotely
When choosing the method, consider the following questions:
1. Standalone Mode or Controller Mode?
2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
3. What kind of user interface will you use, a web browser or the Omada app?
Află mai mult
FAQ
- What is the function we can configure when the switch is managed by Omada SDN Controller?
- How to add an Omada Gateway to the network?
- Cum se instalează controlerul Omada SDN pe sistemul Linux (Controller 4.1.5 sau o versiune superioara)
- Parameters Optimization of Omada SDN Controller for a Better Performance under Large-Scale Network
- How to Build a Mesh Network via Omada EAP in Your Home
- Cum să gestionezi echipamentele EAP din diferite site-uri (locații) prin Internet folosind EAP Controller (cu opțiunea DHCP138 și NAT Port Forwarding)?
- Cum să gestionezi echipamentele EAP din diferite site-uri (locații) prin Internet folosind EAP Controller (cu NAT Port Forwarding și EAP Discover Utility)?
- Cum se configurează Omada Controller ca serviciu Windows (Controller 4.1.5 sau versiuni superioare)
- Why we need to configure mail server on Omada SDN controller before adding cloud user and email log
- Cum se configurează Management VLAN în Omada SDN Controller 4.1.X?
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- Source code template for External Web Portal (Controller 4.1.5 or above)
- Source code template for External Web Portal (Controller 3.1.4 or above)
- Frequently asked questions of Omada SDN solution related to upgrading and management
- The Requirements of Establishing an External Portal Server (above Omada Controller 2.6.0)
- Why my Omada controller cannot manage the latest EAP?
- Q&A for TP-Link Omada App
- Why Backblaze cannot back up the settings and data of Omada Controller?
- Do I need to keep controller running when using portal authentication?
- How to manage EAPs in different VLANs using Omada Controller? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138)? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility)? (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138)? (Old UI)
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility)? (Old UI)
- Frequently asked questions of EAP Series Access Points
- How to use your email or log server to receive the logs of Omada Controller?
- How to configure the WLAN Group function on the Software Controller (or OC200)
- Troubleshooting of Wireless Issues for Omada EAP Products
- How to configure the NPS to manage RADIUS authentication with Omada Controller?
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- How to Configure Band Steering on TP-Link Omada Controller?
- How to Configure Load Balance Omada Controller?
- How to do a silent installation for Omada Controller on Windows OS
- How to configure the portal function on Omada Controller?
- How to optimize wireless performance of EAP products
- Will the Configuration Still Work with EAPs When the Omada Controller Goes Offline?
- How to Configure Voucher Authentication on Omada Controller?
- Source code template for External Web Portal (Controller 3.0.5 or below)
- The Requirements of Establishing an External Portal Server (below Omada Controller 2.5.4)
- How to migrate the configuration files from Omada Software Controller into OC200?
- Guidance and precautions for the upgrade and data migration of Omada Controller/OC200
- Source code template for External Web Portal (Standalone Mode)
- What should I do if I got a certificate error?
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Language of the Printed Voucher Code?
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller?
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
Controller Software
The EAP Controller is used to manage multiple EAPs intensively.
Data publicării: 2020-12-11 | Limba: Engleză | Dimensiune Fişier: 90.11 MB |
Sistem de Operare: Win7/8/10/Server |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Supported device models and firmware:
New Feature/Enhancement: Bug Fixed: |
Data publicării: 2020-12-11 | Limba: Engleză | Dimensiune Fişier: 58.42 MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1
New Feature/Enhancement: 1. Support to manage TL-SL2428P(UN) 4.20. 2. Optimize the protocol for the device reporting information of rate/duplex capability. 3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password. 4. Add the batch cancelling of devices migration in the migration function. 5. Vulnerability optimization
Bug Fixed: 1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP. 2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page. 3. Fixed the bug that the user without device permission may display that it still has permission in the account settings. 4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller. 5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager. 6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller. 7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time. 8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. 5. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian. 6. You may need to save the backup file and uninstall the old Omada Controller before installing this software.
|
Data publicării: 2020-12-11 | Limba: Engleză | Dimensiune Fişier: 59.91 MB |
Sistem de Operare: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Fedora 20 (or above) and Debian 8/9 |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1
New Feature/Enhancement: 1. Support to manage TL-SL2428P(UN) 4.20. 2. Optimize the protocol for the device reporting information of rate/duplex capability. 3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password. 4. Add the batch cancelling of devices migration in the migration function. 5. Vulnerability optimization
Bug Fixed: 1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP. 2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page. 3. Fixed the bug that the user without device permission may display that it still has permission in the account settings. 4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller. 5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager. 6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller. 7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time. 8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. 5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself. 6. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian.
|
Data publicării: 2020-11-10 | Limba: Engleză | Dimensiune Fişier: 59.89 MB |
Sistem de Operare: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Fedora 20 (or above) and Debian 8/9 |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1
New Feature/Enhancement: 1. Support to import the SSL certificate of PFX format. 2. Support to create of up to 1000 sites. 3. Support arbitrary adjustment of logo display and closing logo. 4. Support to paste the IP address for everywhere there is IP setting. 5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller. 6. Support to print all unused voucher codes. 7. Support to delete the archived alert log and event log. 8. Support to export device list, client list, etc. in Export Data function. 9. Support to drag and drop card adjust the dashboard display. 10. Add the Hostname/IP setting which will be used for the controller URL in the notification email. 11. Add Past Connection page in the Insight menu. 12. Improve the MAP topology display.
Bug Fixed: 1. Fixed the bug that the Limited Online Users voucher code still can be used after expired. 2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function. 3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access. 4. Fixed the bug that the cutout logo will show a black background. 5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. 5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.
|
Data publicării: 2020-11-03 | Limba: Engleză | Dimensiune Fişier: 90.09 MB |
Sistem de Operare: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1
New Feature/Enhancement: 1. Support to import the SSL certificate of PFX format. 2. Support to create of up to 1000 sites. 3. Support arbitrary adjustment of logo display and closing logo. 4. Support to paste the IP address for everywhere there is IP setting. 5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller. 6. Support to print all unused voucher codes. 7. Support to delete the archived alert log and event log. 8. Support to export device list, client list, etc. in Export Data function. 9. Support to drag and drop card adjust the dashboard display. 10. Add the Hostname/IP setting which will be used for the controller URL in the notification email. 11. Add Past Connection page in the Insight menu. 12. Improve the MAP topology display.
Bug Fixed: 1. Fixed the bug that the Limited Online Users voucher code still can be used after expired. 2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function. 3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access. 4. Fixed the bug that the cutout logo will show a black background. 5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. |
Data publicării: 2020-07-13 | Limba: Engleză | Dimensiune Fişier: 55.11 MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above
New Feature/Enhancement: 1. Omada SDN software controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points. 2. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function. 3. Add brand new Dashboard interface to monitor network operation in real time. 4. Add Statistics interface to monitor devices and show the statistics of network operation data. 5. Add Topology interface to generate the network topology automatically. 6. Add Insight interface to view the detailed network history data. 7. Add Logs interface that supports 100+ types of logs and custom warning level of logs. 8. Support to configure for gateway, including Internet, LAN Network, ACL, URL Filtering, VPN, Routing, NAT, Session Limit, Bandwidth Control, Portal and so on. 9. Support to configure for switch, including 802.1Q VLAN, ACL, 802.1x, IGMP Snooping, STP and so on. 10. Add Reboot Schedule and PoE Schedule and support to set different schedules for each device.
Notes: 1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 4. This version of controller is applied to Omada APP of version 3.0.X or above. 5. Controller needs Java 8 and MongoDB 3.0.15-3.6.18 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself. |
Data publicării: 2020-07-13 | Limba: Engleză | Dimensiune Fişier: 56.54 MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above New Feature/Enhancement: 1. Omada SDN software controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points. 2. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.
3. Add brand new Dashboard interface to monitor network operation in real time. 4. Add Statistics interface to monitor devices and show the statistics of network operation data. 5. Add Topology interface to generate the network topology automatically. 6. Add Insight interface to view the detailed network history data. 7. Add Logs interface that supports 100+ types of logs and custom warning level of logs. 8. Support to configure for gateway, including Internet, LAN Network, ACL, URL Filtering, VPN, Routing, NAT, Session Limit, Bandwidth Control, Portal and so on. 9. Support to configure for switch, including 802.1Q VLAN, ACL, 802.1x, IGMP Snooping, STP and so on. 10. Add Reboot Schedule and PoE Schedule and support to set different schedules for each device.
Notes: 1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 4. This version of controller is applied to Omada APP of version 3.0.X or above. 5. Controller needs Java 8 and MongoDB 3.0.15-3.6.18 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself. |
Data publicării: 2020-07-06 | Limba: Engleză | Dimensiune Fişier: 86.72 MB |
Sistem de Operare: Windows 7/8/10/Server |
||
If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above
New Feature/Enhancement: 1. Omada SDN software controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points. 2. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function. 3. Add brand new Dashboard interface to monitor network operation in real time. 4. Add Statistics interface to monitor devices and show the statistics of network operation data. 5. Add Topology interface to generate the network topology automatically. 6. Add Insight interface to view the detailed network history data. 7. Add Logs interface that supports 100+ types of logs and custom warning level of logs. 8. Support to configure for gateway, including Internet, LAN Network, ACL, URL Filtering, VPN, Routing, NAT, Session Limit, Bandwidth Control, Portal and so on. 9. Support to configure for switch, including 802.1Q VLAN, ACL, 802.1x, IGMP Snooping, STP and so on. 10. Add Reboot Schedule and PoE Schedule and support to set different schedules for each device.
Notes: 1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 4. This version of controller is applied to Omada APP of version 3.0.X or above. |
Data publicării: 2020-04-20 | Limba: Engleză | Dimensiune Fişier: 120.54MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.) New Feature/Enhancement: 1. Added the feature that the system logs can be exported. 2. Changed the priority that non-administrator role cannot change the history data retention settings. 3. Optimized the UI of Statistics in Omada Controller.
Bug Fixed: 1. Fixed the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters. 2. Fixed the bug that the Cloud Access cannot be displayed normally in the low version of Firefox. 3. Fixed the bug that Omada Controller allow any user to read the files of controller. 4. Fixed the bug that controller will report an error when Top Usage data is empty.
Notes: 1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version. |
Data publicării: 2020-04-20 | Limba: Engleză | Dimensiune Fişier: 124.46MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.) New Feature/Enhancement: 1. Added the feature that the system logs can be exported. 2. Changed the priority that non-administrator role cannot change the history data retention settings. 3. Optimized the UI of Statistics in Omada Controller.
Bug Fixed: 1. Fixed the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters. 2. Fixed the bug that the Cloud Access cannot be displayed normally in the low version of Firefox. 3. Fixed the bug that Omada Controller allow any user to read the files of controller. 4. Fixed the bug that controller will report an error when Top Usage data is empty.
Notes: 1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version. |
Data publicării: 2020-04-20 | Limba: Engleză | Dimensiune Fişier: 99.4MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
Bug Fixed: 1. Fixed the bug that Omada Controller allow any user to read the files of controller. 2. Fixed the bug that controller will report an error when Top Usage data is empty.
Notes: 1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8. |
Data publicării: 2020-04-20 | Limba: Engleză | Dimensiune Fişier: 125.64MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.) Bug Fixed: 1. Fixed the bug that Omada Controller allow any user to read the files of controller. 2. Fixed the bug that controller will report an error when Top Usage data is empty.
Notes: 1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8. 7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first. |
Data publicării: 2020-04-09 | Limba: Engleză | Dimensiune Fişier: 99.39MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.) New Feature/Enhancement: 1. Add the feature that the system logs can be exported. 2. Change the priority that non-administrator role cannot change the history data retention settings. 3. Optimize the UI of Statistics in Omada Controller.
Bug Fixed: 1. Fix the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters. 2. Fix the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.
Notes: 1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8. |
Data publicării: 2020-04-09 | Limba: Engleză | Dimensiune Fişier: 123.36MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Add the feature that the system logs can be exported. 2. Change the priority that non-administrator role cannot change the history data retention settings. 3. Optimize the UI of Statistics in Omada Controller.
Bug Fixed: 1. Fix the bug that the External Web Portal cannot authenticate successfully if the SSID of this portal has special characters. 2. Fix the bug that the Cloud Access cannot be displayed normally in the low version of Firefox.
Notes: 1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8. 7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first. |
Data publicării: 2020-01-21 | Limba: Engleză | Dimensiune Fişier: 120.53MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Expand the number of Omada Controller’s User Account to 500. 2. Optimize the External Portal Server to support URL with parameters.
Notes: 1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version.
|
Data publicării: 2020-01-21 | Limba: Engleză | Dimensiune Fişier: 124.45MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.) New Feature/Enhancement: 1. Expand the number of Omada Controller’s User Account to 500. 2. Optimize the External Portal Server to support URL with parameters.
Notes: 1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version. |
Data publicării: 2020-01-16 | Limba: Engleză | Dimensiune Fişier: 123.35MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.) New Feature/Enhancement: 1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode. 2. Change the mechanism that multiple Omada Controllers can run on the same subnet. 3. Add the button of “Start Omada Controller after installation” and check it by default. 4. Extend the Max Associated Clients in Load Balance to 255. 5. Optimize the UI of Channel Utilization. 6. Optimize the authentication page of portal. 7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo. 8. Optimize the External Portal Server to support URL with parameters.
Bug Fixed: 1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups. 2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist. 3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller. 4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.
Notes: 1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8. 7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first.
|
Data publicării: 2020-01-16 | Limba: Engleză | Dimensiune Fişier: 99.4MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode. 2. Change the mechanism that multiple Omada Controllers can run on the same subnet. 3. Add the button of “Start Omada Controller after installation” and check it by default. 4. Extend the Max Associated Clients in Load Balance to 255. 5. Optimize the UI of Channel Utilization. 6. Optimize the authentication page of portal. 7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo. 8. Optimize the External Portal Server to support URL with parameters.
Bug Fixed: 1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups. 2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist. 3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller. 4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.
Notes: 1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8. |
Data publicării: 2020-01-09 | Limba: Engleză | Dimensiune Fişier: 120.53MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode. 2. Change the mechanism that multiple Omada Controllers can run on the same subnet. 3. Add the button of “Start Omada Controller after installation” and check it by default. 4. Extend the Max Associated Clients in Load Balance to 255. 5. Optimize the UI of Channel Utilization. 6. Optimize the authentication page of portal. 7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.
Bug Fixed: 1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups. 2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist. 3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller. 4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.
Notes: 1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version. |
Data publicării: 2020-01-09 | Limba: Engleză | Dimensiune Fişier: 124.44MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Change the mechanism that when adopting an EAP, the Controller will retain the IP configuration of EAP in Standalone mode. 2. Change the mechanism that multiple Omada Controllers can run on the same subnet. 3. Add the button of “Start Omada Controller after installation” and check it by default. 4. Extend the Max Associated Clients in Load Balance to 255. 5. Optimize the UI of Channel Utilization. 6. Optimize the authentication page of portal. 7. Optimize the UI of the portal that you cannot click Apply when you are uploading a photo.
Bug Fixed: 1. Fixed the bug that the page of MAC filter may not display all groups when there are more than 5 groups. 2. Fixed the bug that after deleting a site, the Voucher code and Local user of this site still exist. 3. Fixed the bug that the site configuration will fail to restore when the imported site contains same Voucher code as the current Controller. 4. Fixed the bug that when mesh AP is powered off during upgrade, Controller may fail to upgrade other APs, with a prompt message “Other APs are upgrading”.
Notes: 1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.X or earlier version. |
Data publicării: 2019-11-08 | Limba: Engleză | Dimensiune Fişier: 99.4MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Add “Select Page” feature on voucher management page. 2. Change default status of “Terms of Service” on default portal page to uncheck. 3. Optimize the “Free Authentication Policy” to support URL with suffixes. 4. Change the default status of new added “Free Authentication Policy” to enable.
Bug Fixed: 1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log. 2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware. 3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake. 4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.
Notes: 1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8. |
Data publicării: 2019-11-08 | Limba: Engleză | Dimensiune Fişier: 123.35MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Add “Select Page” feature on the management page of vouchers. 2. Change the default status of “Terms of Service” to uncheck. 3. Optimize the “Free Authentication Policy” to support URL with suffixes. 4. Change the default status of new added “Free Authentication Policy” to enable.
Bug Fixed: 1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log. 2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware. 3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake. 4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.
Notes: 1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8. 7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first. |
Data publicării: 2019-11-08 | Limba: Engleză | Dimensiune Fişier: 120.52MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Add “Select Page” feature on the voucher management page. 2. Change the default status of “Terms of Service” on default portal page to uncheck. 3. Optimize the “Free Authentication Policy” to support URL with suffixes. 4. Change the default status of new added “Free Authentication Policy” to enable.
Bug Fixed: 1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log. 2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware. 3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake. 4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.
Notes: 1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version. 3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version. 4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller. |
Data publicării: 2019-11-08 | Limba: Engleză | Dimensiune Fişier: 124.43MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Add “Select Page” feature on the voucher management page. 2. Change the default status of “Terms of Service” on default portal page to uncheck. 3. Optimize the “Free Authentication Policy” to support URL with suffixes. 4. Change the default status of new added “Free Authentication Policy” to enable.
Bug Fixed: 1. Fixed the bug that when clients disconnect from the Facebook portal, the connection time and traffic usage of these clients may be zero in the log. 2. Fixed the bug that AP may disconnect from Omada Controller when it is upgrading the firmware. 3. Fixed the bug that in some cases, the channel configuration of 2.4G frequency may show up in 5G by mistake. 4. Fixed the bug that the configuration of SSID will not be issued correctly when changing the WLAN Group on the provisioning status.
Notes: 1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version. 3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version. 4. You are recommended to create a backup before upgrading, or you will not be permitted to install this version of Omada Controller. |
Data publicării: 2019-07-26 | Limba: Engleză | Dimensiune Fişier: 99.23MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Optimize the performance of Controller to manage up to 1500 EAPs. 2. Optimize the interactive process between EAP and Controller to decrease the processing time. 3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million. 4. Optimize display page of map and log when there are a lot of entries.
Bug Fixed: 1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled. 2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously. 3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.
Notes: 1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8.
|
Data publicării: 2019-07-26 | Limba: Engleză | Dimensiune Fişier: 123.15MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Optimize the performance of Controller to manage up to 1500 EAPs. 2. Optimize the interactive process between EAP and Controller to decrease the processing time. 3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million. 4. Optimize display page of map and log when there are a lot of entries.
Bug Fixed: 1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled. 2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously. 3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.
Notes: 1. To use new features on Omada Controller 3.2.x, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.2.X from 2.4.8. 7. When upgrading from Controller 2.5.3 Linux to this version via install.sh, you need to uninstall old version of Controller first. |
Data publicării: 2019-07-04 | Limba: Engleză | Dimensiune Fişier: 120.29MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Optimize the performance of Controller to manage up to 1500 EAPs. 2. Optimize the interactive process between EAP and Controller to decrease the process time. 3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million. 4. Optimize display page of map and log when there are a lot of entries.
Bug Fixed: 1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled. 2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously. 3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.
Notes: 1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version. 3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version. |
Data publicării: 2019-07-04 | Limba: Engleză | Dimensiune Fişier: 124.2MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU version Only.)
New Feature/Enhancement: 1. Optimize the performance of Controller to manage up to 1500 EAPs. 2. Optimize the interactive process between EAP and Controller to decrease the process time. 3. Limit the entry number of client/client history/guest to 1.2 million/1.2 million /6 million. 4. Optimize display page of map and log when there are a lot of entries.
Bug Fixed: 1. Fixed the bug that CPU and memory may be highly used when Fast Roaming is enabled. 2. Fixed the bug that Omada Controller reports timeout error when adopting multiple EAPs simultaneously. 3. Fixed the bug that Controller will print all Voucher codes even only some of the codes are selected.
Notes: 1. To use Omada Controller 3.2.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version. 3. Portal configuration will be lost after upgrading to Omada Controller 3.2.X from 2.4.X or earlier version. |
Data publicării: 2019-03-08 | Limba: Engleză | Dimensiune Fişier: 123.6MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU verison Only.)
New Feature/Enhancement: 1. Merge 2.4GHz and 5GHz SSID. 2. Add Guest Network function. 3. Optimize log field and content. 4. Add SSID Radius accounting to WPA-Enterprise security mode. 5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot. 6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account. 7. Add Layer-3 Accessibility in SSH. 8. Add Mesh settings to Backup and Restore file. 9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller. 10. Add SSID MAC Authentication to none security mode. 11. Add channel utilization function. 12. Add Full-Sector DFS function in Mesh network. 13. Channel limit is revised from private configuration to site settings. 14. Support inputting domain name in SMTP server.
Notes: 1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4. 2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller. 3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above. 4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID. 5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details. 6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller. 7. Channel utilization will take effect only with new firmware. |
Data publicării: 2019-03-08 | Limba: Engleză | Dimensiune Fişier: 127.5MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2 EAP110_V4 EAP115_V1, EAP115_V2 EAP115_V4 EAP225_V1, EAP225_V2 EAP225_V3 EAP110-Outdoor_V1 EAP110-Outdoor_V3 EAP115-Wall_V1 ( EAP115-Wall is suitable for EU verison Only.)
New Feature/Enhancement: 1. Merge 2.4GHz and 5GHz SSID. 2. Add Guest Network function. 3. Optimize log field and content. 4. Add SSID Radius accounting to WPA-Enterprise security mode. 5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot. 6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account. 7. Add Layer-3 Accessibility in SSH. 8. Add Mesh settings to Backup and Restore file. 9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller. 10. Add SSID MAC Authentication to none security mode. 11. Add channel utilization function. 12. Add Full-Sector DFS function in Mesh network. 13. Channel limit is revised from private configuration to site settings. 14. Support inputting domain name in SMTP server.
Notes: 1. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4. 2. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller. 3. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above. 4. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID. 5. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details. 6. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller. 7. Channel utilization will take effect only with new firmware. |
Data publicării: 2017-12-15 | Limba: Engleză | Dimensiune Fişier: 113.15MB |
Sistem de Operare: Windows 7/8/10/Server |
||
Bundled Firmware: EAP110_V1, EAP110_V2, EAP110_V4 EAP115_V1, EAP115_V2, EAP115_V4 EAP225_V1, EAP225_V2, EAP225_V3 EAP245_V1, EAP320_V1, EAP320_V2 New Features/Improvements:
Notes: 1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version. |
EAP Discovery Tool
The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.
Data publicării: 2020-11-09 | Limba: Engleză | Dimensiune Fişier: 33.16 MB |
Sistem de Operare: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
New Feature/Enhancement: 1. Support to discover the gateway and switch that support Omada SDN platform. 2. Add timeout mechanism during adopting the devices.
Note: 1. This version of software can be used in both Windows and Mac operation system. 2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC first. 4. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
Data publicării: 2019-08-06 | Limba: Engleză | Dimensiune Fişier: 25.85 MB |
Sistem de Operare: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
Bug fixed: 1. Fixed the bug that the Discovery Utility may fail to find EAPs. 2. Fixed the bug that the Cancel button may overlap with the display box after managing APs.
Note: 1. This version of software can be used in both Windows and Mac operation system. 2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC first. |
Data publicării: 2019-06-14 | Limba: Engleză | Dimensiune Fişier: 23.54 MB |
Sistem de Operare: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
Bug fixed: 1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs. 2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS. Note: 1. This version of software can be used in both Windows and Mac operation system. 2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC. |
Data publicării: 2018-07-24 | Limba: Engleză | Dimensiune Fişier: 84.16 MB |
Sistem de Operare: Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
New Feature/Enhancement: |
Data publicării: 2016-11-08 | Limba: Engleză | Dimensiune Fişier: 3.39 MB |
Sistem de Operare: WinXP/Vista/7/8/8.1/10/Server2008/Server2012 |
||
Modifications and Bug Fixes: The first Discovery Utility released. Notes: 1. Omada Controller and Discover Utility cannot run on the same computer at the same time. Or Omada Controller/Discovery Utility will report ERROR: port 29810 is already in use. 2. For EAP series, including EAP110, EAP115, EAP120, EAP220, EAP320, EAP330,etc.
|
Cod GPL
Emulatoare
Versiune Firmware |
Working Mode |
Limba |
|
---|---|---|---|
Omada Controller |
- |
Engleză |
Q&A
Documente utile
- Configuring Omada Cloud Service for Omada Controller
- Configuring Omada APP for Omada Controller
- Introduction of EAP Adoption
- How To Configure Cloud Access for Remote Management
- Methods for Managing the Omada EAPs Network
- Application Example of Omada Controller
- Managing the Omada Controller
- Configuring the EAPs Separately via Omada Controller
- Configuring the EAPs Globally via Omada Controller
- Monitoring and Managing Wireless Network via Omada Controller
- Quick Start Guide for Omada Controller
- Configuration Guide for Facebook Portal on EAP Controller 2.5.x
- Configuration Guide for Managing EAPs via EAP Controller
- Configuration Guide for Access Control in Multiple SSIDs
- Omada - Configuration Guide for SMS Portal on EAP Controller