How do I configure MAC Address Clone on my TP-Link Archer Router(new logo)?
Some ISP may register the MAC address of your computer when you dialing up to internet for the first time via modem. If you add a new router into your network to share your internet connection, the modem may still register the MAC address of your computer, in that case, it's needed to configure MAC Address Clone on the router.
Please follow the steps below:
Disconnect the router, connect the computer to the modem which used to dial up to the modem. Make certain the computer has internet access with the modem.
Disconnect the computer from the modem, connect the modem to the WAN/Internet port of the router, and connect the computer to the LAN/Ethernet port of the router.
Here takes Archer C7_V5 as demonstration.
Log in to the router’s web-based interface, to get some help, please refer to the article How to log in to the web-based interface of Wi-Fi Routers (new logo)?
Click Advanced-Network-Internet, choose Use Current Computer MAC Address.
Click Save to save the settings.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
A sua resposta ajuda-nos a melhorar o nosso site.