Download voor T2600G-52TS
>Hoe vind ik de hardware versie van een TP-Link product?
- Product Overview
JetStream 48-Port Gigabit L2 Managed Switch with 4 SFP SlotsMIBs Files
|
T2600G-52TS(UN)_V1_MIB_160412 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-04-12 | Taal: Engels | Bestandsgrootte: 181 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T2600G-52TS(UN)_v1 |
||
|
T2600G-52TS_V1_MIB_160114 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-01-14 | Taal: Engels | Bestandsgrootte: 181 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
|
||
|
T2600G-52TS_V1_MIBs_150806 |
Download | |
|---|---|---|
| Publicatiedatum: 2015-10-14 | Taal: Engels | Bestandsgrootte: 144 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T2600G-52TS_V1_150806 |
||
802.1X Client
|
TP-LINK_802.1X_Client_Software |
Download | |
|---|---|---|
| Publicatiedatum: 2017-09-05 | Taal: Engels | Bestandsgrootte: 5.5MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
|
||
Driver
|
TP-LINK_USB_Console_Driver |
Download | |
|---|---|---|
| Publicatiedatum: 2019-03-13 | Taal: Engels | Bestandsgrootte: 3.10 MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
Notes: For TP-LINK switches with USB Console port |
||
|
TP-LINK_USB_Console_Driver |
Download | |
|---|---|---|
| Publicatiedatum: 2016-06-16 | Taal: Engels | Bestandsgrootte: 3.02 MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/ |
||
|
Notes: USB Console Driver for TP-LINK Managed Switch with USB Console port. |
||
FAQs
- How to enter the BootUtil Menu to factory reset the switch with the console cable
- How to access TP-Link JetStream Managed Switch via the Console port
- How to configure 802.1Q VLAN on L2 Managed switches using the old GUI
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser
- How to limit the port rate of the incoming traffic via ACL function
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to build up an 802.1X access authentication system using TP-Link switch
- How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure LACP on our Smart/ Managed Switch
- How to configure MAC ACL on Smart/Managed switch
- How to configure IGMP Snooping for IPTV network using L2 switch
- How to configure the default gateway of the smart and managed switches using the old GUI
- How to configure the DHCP Relay in TP-Link Switch
- How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI
- How to manage the switch with Mac via Micro USB cable
- How to achieve AAA Authentication through TACACS + server on the switch
- Why the Firmware Version Does Not Change after Upgrading in T Series Switches?
- What should I do if I cannot access the web management page of my TP-Link switch?
- The difference between the Voice VLAN feature and Auto VOIP feature
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP
- What is the Console Cable and the line sequence of it?
- How to Block Unknown Devices to Access the Switch by Using IP Source Guard
- How to Block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- How to configure Extended IP ACL
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
Hoe vind ik de hardware versie van een TP-Link product? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
T2600G-52TS(UN)_V1_160412 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-04-12 | Taal: Engels | Bestandsgrootte: 14.22 MB |
|
Modifications and Bug Fixes: 1.Enhanced the performance of the Voice VLAN2.Add new features in the SNMP and its MIB file. Notes: 1.For T2600G-52TS(UN)_v1;2.Upgrading the firmware will only upgrade the backup image; 3.Your device’s configuration won't be lost after upgrading. |
||
|
T2600G-52TS_V1_160114 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-01-14 | Taal: Engels | Bestandsgrootte: 14.22 MB |
|
Modifications and Bug Fixes: New Features/Enhancement:1. IPv6 static routing, IPv6 ACL and DHCPv6 snooping are supported. 2. Added new features Serial Port Settings, Password Recovery and User Account Setting 3. New features L2PT, sFlow, OAM, VLAN VPN, DHCP relay, PPPoE Circuit ID are supported. 4. Enhanced ACL, Multicast, 802.1x. Notes: 1. For T2600G-52TS_V1.2. As many features have been enhanced, the configuration may be lost after upgrading, and it is not suggested to import the old config file to the device after upgrading. |
||
|
T2600G-52TS_V1_150806 |
Download | |
|---|---|---|
| Publicatiedatum: 2015-10-14 | Taal: Engels | Bestandsgrootte: 14.00 MB |
|
Modifications and Bug Fixes: First firmware release of T2600G-52TS Notes: For T2600G-52TS V1 |
||
Gebruik van Firmware van Derde Partijen in TP-Link Producten
Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.