How to setup TP-Link wireless router with Unifi IPTV (new designed blue UI)

User Application Requirement
Updated 06-28-2022 07:45:31 AM 158637
This Article Applies to: 

This article applies to wireless routers which adopt the newly designed web UI interface.

Note: Please prepare the Username and Password from Unifi for your internet service first. If you are not sure, please contact Unifi to get the information.

First part is the basic internet settings:

Step 1 Connect your computer to the LAN 2,3,or4 port of the TP-Link router. Connect the Unifi modem to the WAN port of the TP-Link router.

Step 2 Open the web browser and in the address bar type inhttp://tplinkwifi.net. And then press Enter.

cid:image002.jpg@01D10835.9B141AD0

Step 3 Type the username and password in the login page. The default username and password both are admin.

cid:image004.jpg@01D10835.9B141AD0

Step 4 Selecting Quick set up and Choosing the region and time zone , click Next.

cid:image006.jpg@01D10835.9B141AD0

Step 5 Then Working Mode choose PPPoE Mode and click Next.

cid:image007.png@01D10834.9DC6FB40

Step 6 Put in the Username and Password from Unifi, click Next.

cid:image008.png@01D10834.9DC6FB40

Step 7 You can create your own Wireless Network Name and Password on this page, click Save.(For dual-band routers, you will be required to set up the wireless for 2.4GHz and 5GHz).

cid:image010.jpg@01D10835.9B141AD0

Step 8 Click Finish .Wait for the router to keep settings itself ,at the meantime, please power cycle the Unifi modem.

cid:image011.jpg@01D10835.9B141AD0

Step 9 After the modem and router are configured, please go to Status page, check WAN section, if the IP Address shows 0.0.0.0,please double check your Username and Password from unifi and do the Quick Setup again. If it shows other numbers, that means the router is configured successfully.

cid:image012.jpg@01D10835.9B141AD0

Second part is the settings of the Unifi IPTV.

Step 1

Please go to the Advanced-Network-IPTV:

cid:image014.jpg@01D10835.9B141AD0

Step 2 Click Enable IPTV and choosing the mode as Malaysia Unifi, then click save.

cid:image016.jpg@01D10835.9B141AD0

Step 3 Connect your TV to LAN 1 and try the IPTV service.

Is this faq useful?

Your feedback helps improve this site.

From United States?

Get products, events and services for your region.