How to bind IP&MAC address on High Power Wireless N Router_TL-WR841HP V5 (router mode--new logo)

Configuration Guide
Updated 06-27-2022 07:33:42 AM 24788
This Article Applies to: 

Here takes TL-WR841HP for demonstration.

1. This feature take effects when the router is in Wireless Router mode. Follow the instructions below to configure the router.

How to configure Router Mode of High Power Wireless N Router_TL-WR841HP V5? (new logo)

2. Go to IP & MAC Binding > Binding Settings.

3. Select Enable for ARP Binding.

4. Click Save.

To add IP & MAC Binding entries:

1. Click Add New.

2. Select the Bind checkbox.

3. Enter the MAC address and IP address.

4. Click Save.

To modify or delete an existing entry:

1. Select the desired entry in the table.

2. Click Edit or Delete Selected.

You can observe the device on the LAN by checking its MAC address and IP address on the ARP list, and you can also configure the items.

MAC Address - The MAC address of the listed computer on the LAN.

IP Address - The assigned IP address of the listed computer on the LAN. • Status - Indicates whether or not the MAC and IP addresses are bound.

Status - Indicates whether or not the MAC and IP addresses are bound.

• Click the Load Selected button to load the selected items to the IP & MAC Binding list.

• Click the Delete Selected button to delete the selected items to the IP & MAC Binding list.

Note: An item can not be loaded to the IP & MAC Binding list if the IP address of the item has been loaded before. Error warning will prompt as well. Likewise, Load All only loads the items without interference to the IP & MAC Binding list.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

From United States?

Get products, events and services for your region.