What should I do if internet connection is slow when the device is connected to the TP-Link DSL Modem?

Archer VR900 , Archer VR2600v , Archer VR2100 , TD-W9970 , Archer VR2800v , Archer VR400v , Archer VR600v , TD-W9950 , Archer VR200v , Archer VR2600 , Archer VR2800 , Archer VR1200v , Archer VR1210v , TD-W9960v , Archer VR1600v , Archer VR600b , Archer VX1800v , Archer VX1810v , TD-W9970B , Archer VR2100v , Archer VR900v , Archer VR500v , TD-W9960 , Archer VR900b , Archer VR1200 , Archer VR200 , TD-W8961N , Archer VR300 , Archer VR400 , Archer VR600
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
Internet speed may be affected by many factors. This FAQ will help you figure out what cause the problem and offer you some tips to improve the speed.
Note:
End-device mentioned below means computer, laptop, mobile phone, etc.
Case 1 Wired and wireless speeds are both slow
Step 1. Login the web-based interface of the modem. Check DSL Status. Please take screenshot of the Status page for further help.
Step 2. Connect only one end-device to the TP-Link modem via cable, and do the Speedtest® (www.speedtese.net) three times without doing any high bandwidth activities like P2P download. Take screenshots as well.
Step 3. Check wired link speed of the end-device and take Screenshots. Please refer to this FAQ.
Skip this step if you don’t know where to find it.
Step 4. Contact TP-Link support with screenshots of Status page, Speedtest® results and link speed info, and let us know the total bandwidth from your ISP.
Case 2 Wireless is slow, while wired speed is normal
Step 1. Simplify network topology by connecting one end-device to the TP-Link modem via wireless, and do the Speedtest®(www.speedtest.net)three times without doing any high bandwidth activities like P2P download. Take screenshots.
Step 2. Check wireless link speed of your end-device and take Screenshots. Please refer to this FAQ.
Skip this step if you don’t know where to find it.
Step 3. Change Channel Width, 2.4GHz→40MHz, 5GHz→80Mhz, refer to this FAQ.
Go to step 4 if still to no avail.
Step 4
The problem occurs on 5GHz or 2.4GHz? If end-devices support 5GHz as well, connect to 5GHz to check if it’s better or not.
For 2.4GHz, change the Channel (channels 1, 6 and 11 are generally best, but any channel can be used, please try a few more channels). A wireless channel determines which operating frequency will be in use. It is not necessary to change the channel unless you’re noticing interference problems with nearby wireless networks.
If the above suggestions still cannot fix the problem, please contact support with screenshots of Speedtest® results and link speed info, and let us know the total bandwidth from your ISP.
関連トピック
Looking for More
このFAQは役に立ちましたか?
サイトの利便性向上にご協力ください。
どのような点がご満足いただけませんでしたか?
- 製品自体が不満
- 複雑すぎる
- タイトルが分かりづらい
- 探している内容がなかった
- 曖昧すぎる
- その他
お役に立てて何よりです。
ご意見をお寄せいただきありがとうございます。
TP-Linkカスタマーサポートにはこちらからお問い合わせいただけます。
Basic Cookies
These cookies are necessary for the website to function and cannot be deactivated in your systems.
TP-Link
accepted_local_switcher, tp_privacy_base, tp_privacy_marketing, tp_smb-select-product_scence, tp_smb-select-product_scenceSimple, tp_smb-select-product_userChoice, tp_smb-select-product_userChoiceSimple, tp_smb-select-product_userInfo, tp_smb-select-product_userInfoSimple, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
Livechat
__livechat, __lc2_cid, __lc2_cst, __lc_cid, __lc_cst, CASID
YouTube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
Analysis and Marketing Cookies
Analysis cookies enable us to analyze your activities on our website in order to improve and adapt the functionality of our website.
The marketing cookies can be set through our website by our advertising partners in order to create a profile of your interests and to show you relevant advertisements on other websites.
Google Analytics & Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads & DoubleClick
test_cookie, _gcl_au
Meta Pixel
_fbp
Crazy Egg
cebsp_, _ce.s, _ce.clock_data, _ce.clock_event, cebs
lidc, AnalyticsSyncHistory, UserMatchHistory, bcookie, li_sugr, ln_or