-
RUMAH
SOHO Switches
Keeping your home wired for quality connections
Accessories
Everything else you need for a connected lifestyle
-
Smart Home
Cloud Camera
Keeping an eye on what matters
Smart Plug
Smarten up your home devices
Smart Bulb
Light for every occasion
-
BISNIS
Omada Cloud SDN
The smarter cloud solution for business networking
Switches
High-Speed wired networking from L3 managed to unmanaged
Pharos Wireless Broadband
Ideal for long range wireless broadband networking
SafeStream Router
Secure VPN and Load Balance gateways to the business
-
PENYEDIA LAYANAN
GPON
The leading technology for delivering gigabit Internet services
How to make my TP-Link Wireless Modem Router support Airprint on TD-8816/8817/8840T/8901N/8151N/8961N(D/B)?
This Article Applies to:
- AirPrint is a component of Apple iOS, version 4.2 or later, for printing via WiFi. It is based on Bonjour protocol, which is widely used on all APPLE devices.
- Please click here to check whether your Printer support AirPrint first.
What to DO on TP-Link Wireless Modem?
Step 1 Connect one of your computer to the TP-Link wireless modem, Open the Web browser and type the IP address of the modem (Default is 192.168.1.1) in the URL address bar, then press the Enter button.
.jpg)
Step 2 When you are prompted, enter the router’s username and password (Default username and password are both admin).
.jpg)
Step 3 Please go to Interface setup->LAN page, Select the Multicast as IGMP v2 and enable IGMP Snoop. At last, click Save button.
.jpg)
Is this faq useful?
Your feedback helps improve this site.
Your feedback helps improve this site.