How to reset TP-Link Kasa smart bulb?

Configuration Guide
Updated 07-10-2020 02:45:25 AM
This Article Applies to: 

There are two types of reset available: a soft reset which does not erase the current settings, and a factory reset that erases all of your custom settings and restore them to factory defaults.

Please refer to the following video [How to Reset a TP-Link Kasa Smart WiFi Light Bulb] to get more detailed information:

Or please refer to those steps to reset the bulb:

To reset the Smart Wi-Fi LED Bulbs without losing the configuration settings:

1. Turn the light switch controlling the bulb to the OFF position.

2. Flip the light switch on and off 3 times

 

To reset the Smart Wi-Fi LED Bulbs to factory defaults:

1. Turn the light switch controlling the bulb to the OFF position.

2. Flip the light switch on and off 5 times.

When reset the bulb, please do not switch the bulb on and off too quickly, the time duration is around 1s.

For the KL430, please press and hold the button on the controller for 10 seconds until the Light Strip animates orange and green to enable Setup Mode.

SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.